EMCP 4.4 Control Panel

ABOUT THE emcp 4

The Cat® EMCP 4 Control Panel provides all of the controls and system indicators in one easy to access interface.

Add the EMCP 4 4 CONTROL PANEL Model to the Cart
  • Control
    • Auto / Start / Stop control
    • Remote start / stop
    • Speed and voltage adjust
    • Engine Cooldown Timer
    • Local and remote emergency stop
    • Engine Cycle Crank
    • Programmable Cycle Timer
    • Paralleling Multiple Generator Sets or Single Generator Set to Single Utility
  • Multiple Generator Set Paralleling
    • Load sense / load demand
  • Single Gen To Single Utility Paralleling
    • Emergency Mode with Closed/Open Return
    • Standby Emergency
    • Base Load Control
    • Import/Export
    • Soft Load/Unload
    • Load shed/add (Up to Six Stages)
    • LV/MV/HV capable (< 15kV)
    • Genset & Utility Circuit Breaker control
  • Display
    • A 480 x 320 pixel, 5.5 inch, white backlit graphical display denotes text alarm/event descriptions, set points, engine and generator monitoring, and is visible in all lighting conditions.
  • Generator Monitoring
    • Voltage (L-L, L-N)
    • Current (Phase)
    • Average Volt, Amp, Frequency
    • kW, kVAr, kVA (Average, Phase, %)
    • Power Factor (Average, Phase)
    • kW-hr, kVAr-hr (total)
  • Generator Protection
    • Over/Under voltage (27/59)
    • Over/Under frequency (81/OU)
    • Generator phase sequence
    • Bus phase sequence
    • Overcurrent (50/51)
    • Overcurrent (Thermal Damage Curve)
    • Reverse Power (kW)(32)
    • Reverse Reactive Power (kVAr) (32RV)
    • Current Balance (46)
  • Engine Monitoring
    • Engine speed (RPM)
    • Battery voltage
    • Oil pressure
    • Oil Temperature
    • Coolant temperature
    • Multiple Language Support
    • Crank attempt and successful start counter
    • Run hours
    • Enhanced engine monitoring (with electronic engines)
  • Engine Protection
    • Low engine oil pressure (alarm)
    • High engine oil temp (alarm and shutdown)
    • High coolant temp (alarm and shutdown)
    • Low coolant temp (alarm)
    • Low coolant level (alarm)
    • Overcrank
    • Overspeed
    • Control switch not in auto (alarm)
    • Low, high, and weak battery voltage
  • Communications
    • Primary and accessory CAN data links
    • RS-485 annunciator data link
    • Modbus RTU (RS-485 Half duplex)
    • Modbus TCP (10BT Ethernet)
  • Inputs & Outputs
    • Seventeen programmable digital outputs
    • Two dedicated analog inputs
    • Two programmable analog inputs
    • Two dedicated digital inputs
    • Twelve programmable digital inputs
  • Language Support
    • Arabic, Bulgarian, Chinese, Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Icelandic, Italian, Latvian, Lithuanian, Japanese, Norwgian, Polish, Portguese, Romanian, Russian, Slovak, Slovene, Spanish, Swedish & Turkish
  • Environmental
    • Control module operating temperature: -40°C to 70°C
    • Display operating temperature: -20°C to 70°C
    • Humidity: 100% condensing 30°C to 60°C
    • Storage temperature: -40°C to 85°C
    • Vibration: Random profile, 24-1000 Hz, 6.0G ms
  • Generator Monitoring
    • Excitation voltage and current (with CDVR)
    • Generator stator and bearing temp (with optional module)
  • Can Annunciator
    • The EMCP 4 CAN Annunciator serves to display genset system alarm conditions and status indications.The annunciator has been designed for use on the accessory communication network and may be used in either local (package mounted) or remote (up to 800 feet) application.
    • A maximum of four annunciators may be used with a single EMCP 4.4
  • Rs-485 Annunciator
    • The EMCP 4 RS-485 Annunciator serves to display genset system alarm conditions and status indications.The annunciator has been designed for use on the long distance annunciator datalink and is used for remote (up to 4000 feet) application.
  • Remote Hmi Display
    • The EMCP 4 Remote HMI serves to display generator set system alarm conditions and status indications through an interactive graphical interface. Featuring an 8� color LCD touch screen that may be mounted remotely using 1m harness with terminal block. A maximum of 1 display may be used with a single EMCP 4.4.
  • Remote Monitoring Software
    • The EMCP 4 remote monitoring software package is a PC based program which allows the user tomonitor and control a generator set, and is capable of running on a Windows based operating system.The remote monitoring software allows the user to configure data monitoring and data acquisitionprocesses for monitoring, graphing, and logging of genset data.
  • Digital Input/output Module
    • The Digital Input/Output (DI/O) module serves to provide expandable Input and Output capability of the EMCP 4 and is capable of reading 12 digitalinputs and setting 8 relay outputs. The DI/Omodule has been designed for use on the accessoryCommunication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.
    • A maximum of four DI/O modules may be used with a single EMCP 4.4.
  • Rtd Module
    • The RTD module serves to provide expandable generator temperature monitoring capability of the EMCP 4 and is capable of reading up to eight type 2-wire, 3-wire and 4-wire RTD inputs. The RTD Module has been designed for use on the Accessory Communication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.
    • A maximum of one RTD Module may be used with a single EMCP 4.4.
  • Thermocouple Module
    • The thermocouple module serves to provide expandable engine and generator temperature monitoring capability of the EMCP 4 and iscapable of reading up to twenty Type J or K thermocouple inputs. The thermocouple module has been designed for use on the accessory communication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.
    • A maximum of one thermocouple module may be used with a single EMCP 4.4 on each datalink.




STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here