Exterior View
Interior View

R3000H Underground Mining Loader

Our largest underground loader, the Cat® R3000H is a low-cost specialist. Designed for the largest underground mines, it’s a super-productive, durable machine that delivers high performance and long life to lower cost per ton and overall cost of ownership. Safety comes standard, with most safety features built in — including an Operator Present System that protects the machine and operator from uncontrolled machine movements. Its 100% Caterpillar designed and manufactured powertrain components deliver top reliability and performance. And its durable frame and components combine with improved serviceability to deliver the high uptime you demand.

Engine Model
Cat® C15
Engine Power – Tier 3 Engine – ISO 14396:2002
401hp
Engine Power – VR Engine – ISO 14396:2002
401hp
Bore
5.4in
Stroke
6.8in
Displacement
927.6in³
Note (1)
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (2)
All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica
Note (3)
No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines.
Note (4)
Optional Ventilation Reduction package available.
Note (5)
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Nominal Payload Capacity
44092lb
Gross Machine Mass
180779lb
Static Tipping Load – Straight Ahead – Lift Arms Horizontal
104199lb
Static Tipping Full Turn Ahead Lift Arms Horizontal
88191lb
Breakout Force – SAE
61773lb
Operating Mass*
128448lb
Operating Mass* – Front Axle
54558lb
Operating Mass* – Rear Axle
73853lb
Operating Mass + Rated Payload*
172540lb
Operating Mass + Rated Payload* – Front Axle
125187lb
Operating Mass + Rated Payload* – Rear Axle
47316lb
Note
*Calculated weight.
Bucket Capacities
8.9-11.6 m³ (11.6-15.2 yd³)
Dump Bucket – 1 – Standard Bucket
11.6yd³
Dump Bucket – 2
12.4yd³
Dump Bucket – 3
13.7yd³
Light Material Bucket
15.2yd³
Outside Clearance Radius**
296.7in
Inner Clearance Radius**
127.8in
Axle Oscillation
Articulation Angle
42.5°
Note
**Clearance dimensions are for reference only.
Engine Crankcase
9gal (US)
Transmission
16.4gal (US)
Hydraulic Tank
37gal (US)
Cooling System
19.8gal (US)
Front Differential and Final Drives
31.4gal (US)
Front Differential and Final Drives – With Axle Oil Cooling System
42gal (US)
Rear Differential and Final Drives – With Axle Oil Cooling System
44.1gal (US)
Fuel Tank
406.5gal (US)
Rear Differential and Final Drives
33.5gal (US)
Raise
8.8s
Dump
1.85s
Lower, Empty, Float Down
3.54s
Total Cycle Time
14.2s
Forward – 1
3mile/h
Forward – 2
5.7mile/h
Forward – 3
10.2mile/h
Forward – 4
17.5mile/h
Reverse – 1
4.1mile/h
Reverse – 2
7.1mile/h
Reverse – 3
12.7mile/h
Reverse – 4
19.4mile/h
Tire Size
35/65 R33
Standards
Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab
  • Tires, Rims, And Wheels
    • Tires Arrangements: Tires Must Be Selected From the Mandatory Attachments Section, Choose Between:
      – Tire, 35/65 R33, VSNT, Bridgestone
      – Tire, 35/65 R33, VSDL, Bridgestone
    • Rims (set of four):
      – Five Piece, Tubeless
  • Electrical
    • Alarm, Reversing
    • Alternator, 95 Amp
    • Battery Disconnect Switch, Ground Level
    • Batteries, Low Maintenance
    • Diagnostic Connector
    • Engine Shutdown Switch
    • Lighting:
      – External, Front, Rear, Halogen
      – Stop, Dual, Halogen
    • Receptacle Group, Auxiliary Start
    • Starter, Electric, 24-Volt
    • Starting and Charging System
  • Operator Environment
    • Automatic Brake Application (ABA)
    • Cab Enclosed:
      – ROPS/FOPS Certified
      – Air Conditioning
      – Cab Pressurizer and Filter
      – Dome Light
      – Heater
      – Radio Ready Compartment for Radio and Speakers
      – Salt Resistant Air Conditioner
    • Caterpillar Electronic Monitoring System (CEMS), (dash instrumental panels)
    • Horns, Electric
    • Instrumentation/Gauges:
      – Speedometer/Tachometer
      – Fuel Level
      – Hydraulic Oil Temperature
      – Engine Coolant Temperature
    • Operator Presence System
    • Light, Warning, Residual Brake
    • Low Hydraulic Level Warning
    • Pilot Hydraulic Implement Controls (single joystick)
    • Seat:
      – Seat, Suspension, Vinyl
    • Seat Belt, Retractable
  • Power Train
    • Brakes, Full Hydraulic Enclosed Wet Multiple-Disc Spring Applied, Fluid Released (SAFR)
    • Engine:
      – Cat C15 6 Cylinder Diesel
      – Air-To-Air Aftercooler (ATAAC)
    • Exhaust:
      – Particulate Filter, Flow Thru
      – Particulate Filter, Wall Flow
    • Filter, Engine, Remote Mounted
    • Fuel Adapters:
      – Standard Fill, Dual, Rubber Coated, Double Steel Braided Fuel Lines
    • Fuel Priming Aid
    • Park Brake Switch Engagement, Choose Between:
      – Push to Apply
      – Pull to Apply
    • Precleaner, Engine Air Intake
    • Torque Converter with Automatic Lock-Up Clutch
    • Transmission, Automatic Planetary Powershift (4F/4R)
    • Transmission Neutralizer
  • Other Standard Equipment
    • Windows:
      – Single Pane
    • Brake Axle Cooling
    • Brake Light
    • Cap, Radiator, Manual Release
    • Catalytic Exhaust Purifier/Muffler
    • Dump Bucket (8.9 m3/11.6 yd3)
    • Bucket Lip:
      – Modular Weld-On
      – Lip Weldings – Full Weld Edge or Tack Weld Edge and Corners
    • Decals, International Picto Graphics
    • Fenders, Front, Rear
    • Firewall
    • Fuel Systems:
      – Dual Fuel Tanks
      – Fuel System Manual Shut Off Taps
    • Guards, Engine and Transmission
    • Handholds (Access On/Off Top Deck)
    • Lift Arm Positioner for Return to Dig
    • Radiator Grill, Swing Out
    • Service Oil Sample
    • Valve, Drain, Transmission Oil Filter
    • Valve, Hydraulic, Standard
  • Power Train
    • Engine Options:
      – Engine, Ventilation Reduction (VR)
      – VR Engine, Flow Thru Ready
      – Engine, Tier 3
    • Exhaust:
      – Exhaust, Purifier, Muffler
    • Fuel Adapters:
      – Standard Fill, Dual, Stainless Steel Covered, Single Braided Fuel Lines
      – Fast Fill, Dual, Rubber Coated, Double Steel Braided Fuel Lines
      – Fast Fill, Dual, Stainless Steel Covered, Single Braided Fuel Lines
    • Secondary Steering System
  • Electrical
    • Battery Disconnect Switch, In Cab
    • Lighting:
      – Cat LED Worklights
  • Operator Environment
    • Camera, Color Rear Facing
    • Duct, Air, Flow Diverter
    • Idle Timer (enclosed cab)
    • Instrumentation/Gauges:
      – Brake Pressure
    • Seat:
      – Seat, Suspension, Tee, Vinyl
      – Seat, Suspension, Air, Vinyl
      – Seat Cover
  • Technology Products
    • Command for Underground*
    • Vital Information Management System (VIMS) Gen 3
    • Payload System, Loadrite
    • Remote Control Interface (excludes Transmitter and Receiver) – RCT
    • *Please consult with your Regional Commercial or Technology Representative prior to upgrading your machine to Command for Underground.
  • Tires, Rims, And Wheels
    • Rim Identification Numbering
    • Spare Rim, Tubeless
  • Other Optional Equipment
    • Brake release arrangements:
      – Recovery hook
      – Recovery bar
    • Buckets:
      – Various Sizes, Dump (9.5 m3/12.4 yd3, 10.5 m3/13.7 yd3)
      – Light Materials, Dump (11.6 m3/15.2 yd3)
      – Light Materials, Dump, Uninstalled (11.5 m3/15.0 yd3)*
    • Bucket Lip:
      – Bolt On Lips
      – Durilock
    • Ground Engaging Tools (GET):
      – Cutting Edge, Cat Weld-On
      – Cutting Edge, Bolt-On Half Arrow
      – Cutting Edge, Shrouds, Durilock
      – Mechanically Attached Wear Plate System (MAWPS) – Bucket Lip Protection
      – Heel Shrouds
      – Wear Bars
      – Liners
      – Overflow Guard
    • Faster Fill and Evacuation Systems:
      – Engine, Fast Fill
      – Radiator, Fast Fill
      – Hydraulic, Fast Fill
      – Transmission, Fast Fill
    • Draw Bar Attachment, Bolt-On
    • Fire Suppression System:
      – Foam, Water Based
    • Fluids:
      – Arctic Coolant
      – Arctic Fuel
    • Guard, Light and Window
    • Handrails
    • Lubrication System:
      – Automatic
      – Centralized
    • Mine Transfer
    • Reversible Steering
    • Reflective Tape
    • Ride Control System
    • Service Tools:
      – Collet Jacking Bolts
      – Recovery Bar
    • Vandalism Protection
    • Windows:
      – Dual Pane
    • Wear Protection Bars:
      – Cab/ROPS
      – Hydraulic Tank
      – Radiator

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here