Find your Louisiana Cat
(866) 843-7440
Contact Us
Exterior View
Interior View
Engine Model

Cat® 3306B DITA

Engine Power – ISO 14396:2002

157 hp

Nominal Payload Capacity

14991 lb

R1300G Underground Mining Loader

ABOUT THE r1300g UNDERGROUND

The Cat® R1300G is our smallest underground loader, but with a breakout force of 12 020 kg (26504 lb) and 117 kW (157hp) of engine power, it brings maximum production capability to smaller mines. Productivity is enhanced thanks to a smaller turning circle compared to competitive machines. It offers a larger fuel tank so it can run longer between refilling, and superior bucket reach and bucket dump for better loading and faster emptying. An operator favorite, the R1300G features excellent loaded weight distribution, ride control and seat suspension for maximum comfort. And to raise the bar on air quality in your mine, you can equip your R1300G with an optional diesel particulate filter. The R1300G is an ideal match for the Cat AD22 truck.

            
Add the R1300G UNDERGROUND MINING LOADER Model to the Cart
Request a Quote View rental options Apply for credit
Engine Model
Cat® 3306B DITA
Engine Power – ISO 14396:2002
157hp
Bore
4.75in
Stroke
6in
Displacement
640.75in³
Note (1)
Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard.
Note (2)
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (3)
Engine derate will commence at an altitude of 4500 m (14,763.7 ft).
Nominal Payload Capacity
14991lb
Gross Machine Mass
65482lb
Static Tipping Load – Straight Ahead – Lift Arms Horizontal
45360lb
Static Tipping Load – Full Turn – Lift Arms Horizontal
39397lb
Breakout Force – SAE
26504lb
Operating Mass*
45691lb
Operating Mass* – Front Axle
16810lb
Operating Mass* – Rear Axle
28881lb
Operating Mass + Rated Payload*
60682lb
Operating Mass + Rated Payload* – Front Axle
41105lb
Operating Mass + Rated Payload* – Rear Axle
19577lb
Note
*Calculated weights.
Forward – 1
2.8mile/h
Forward – 2
4.8mile/h
Forward – 3
9.3mile/h
Forward – 4
16.3mile/h
Reverse – 1
2.8mile/h
Reverse – 2
4.8mile/h
Reverse – 3
9.2mile/h
Reverse – 4
14.3mile/h
Raise
5s
Dump
2s
Lower, Empty, Float Down
2.3s
Total Cycle Time
9.3s
Dump Bucket – 1
3.2yd³
Dump Bucket – 2
3.7yd³
Dump Bucket – 3 – Standard Bucket
4.1yd³
Dump Bucket – 4
4.4yd³
Ejector Bucket
3.1yd³
Outside Clearance Radius
225.1in
Inner Clearance Radius
111.2in
Axle Oscillation
10°
Articulation Angle
42.5°
Tire Size
17.5 × R25
Engine Crankcase – With Filter
6.6gal (US)
Transmission
11.9gal (US)
Hydraulic Tank
23.2gal (US)
Cooling System
17.7gal (US)
Front Differential and Final Drives
10gal (US)
Rear Differential and Final Drives
11.1gal (US)
Fuel Tank
77.9gal (US)
Standards
ROPS/FOPS Certified Cab
  • Electrical
    • Alternator, 75-amp
    • Receptacle group, auxiliary start
    • Battery Disconnect Switch, Ground Level
    • Starter, electric, 24-volt
    • Diagnostic Connector
    • Engine Shutdown Switch
    • Lighting:
      – External, front, rear
      – Stop, single
    • Batteries, low maintenance
    • Alarm, reversing
    • Starting and Charging System
  • Tires, Rims, And Wheels
    • Rims:
      – Tubeless, set of four
    • Tires must be selected from the Mandatory Attachments section, choose between:
      – Tire, 17.5 × R25 VSMS L5S Bridgestone
      – Tire, 17.5 × R25, VSDL Bridgestone
  • Operator Environment
    • Caterpillar Electronic Monitoring System (CEMS), (dash instrument panels)
    • Horns, electric
    • Instrumentation/gauges:
      – Speedometer/tachometer
      – Fuel level
      – Hydraulic oil temperature
      – Engine coolant temperature
    • Light, warning, residual brake
    • Pilot Hydraulic Implement Controls, Single Joystick
    • Cab, ROPS and/or FOPS certified
    • Steering and Transmission Integrated Control (STIC™) Steering
    • Seat, Suspension Tee with retractable seat belt
  • Power Train
    • Engine:
      – Cat 3306B six cylinder, diesel
      – DITA (Direct Injection, Turbocharged, Aftercooled)
    • Precleaner, engine air intake
    • Fuel Priming Aid
    • Brakes, full hydraulic enclosed wet multiple-disc (SAFR)
    • Heat Shields
    • Torque Converter
    • Transmission Neutralizer
    • Transmission, automatic planetary power shift (4F/4R)
  • Other Standard Equipment
    • Guards, engine and transmission
    • Bucket Dump (3.1 m3/4.1 yd3)
    • Catalytic Exhaust Purifier/Muffler
    • Cap, Radiator Manual Release
    • Decals, International Picto Graphics
    • Service oil sample
    • Fenders, Front, Rear
    • Firewall
    • Handholds
    • Hydraulic Oil Cooler, Swing Out
    • Valve, drain, transmission oil filter
    • Protection bars, rear frame
    • Radiator Grill, Swing Out
  • Tires, Rims, And Wheels
    • Rims:
      – Tube, set of four
      – Spare (Tube or Tubeless)
      – Rim Identification Numbering
  • Optional Equipment
    • After-Treatment Options
      – DPF (Flow Through)
    • Brake Release Arrangements, Includes Steering Release
      – Recovery Hook
      – Recovery Bar
    • Bucket:
      – Cutting Edge, Bolt-On
      – Cutting Edge, Cat Weld On
      – Heel Shrouds, Ejector and Dump Buckets
      – Lip Fully Welded or Tack Welded
      – Mechanically Attached Wear Plate System (MAWPS)
      – Various Sizes, Dump (2.5 m3/3.2 yd3, 2.8 m3/3.7 yd3, 3.4 m3/4.4 yd3), Ejector (2.4 m3/3.1 yd3)
      – Standard Lip or Bolt-On Lip
      – Wear Bars, Ejector and Dump Buckets
      – Wear Liner
    • Covers:
      – Guard, for lift arm and front frame lights
      – Rear Grill (Additional Bolt-On Guard)
    • Draw Bar Attachment, Bolt-On
    • Fast Fill System:
      – Coolant
      – Engine Oil
      – Fuel
      – Hydraulic Oil
      – Transmission Oil
    • Fluids
      – Arctic Fuel
      – Arctic Coolant
    • Lifting Group, Mine Transfer
    • Lubrication System
      – Automatic
      – Centralized
    • Operators Station ROPS/FOPS Enclosed
      – Air Conditioning
      – Cab Pressurizer and Filter
      – Dome Light
      – Door Strut
      – Heater
      – Radio Ready Compartment for Radio and Speakers
      – Wiper Control, Intermittent
    • Park Brake Automatic Activation
    • Park Brake Switch Engagement
      – Push to Apply
      – Pull to Apply
    • Reflective Tape
    • Remote Control Interface (excludes Transmitter and Receiver), Includes Warning Lights (Green)
      – Cattron
      – RCT
    • Reversible Steering
    • Ride Control System
    • Rim
      – Tube Type
      – Tube or Tubeless (chain ready)
      – Spare (Tube or Tubeless)
      – Rim Identification Numbering
    • Secondary Steering System
    • Service Tools
      – Recovery Bar (for use with Brake Release, Recovery Bar System)
      – Reference Parts Manual for Additional Tooling Available
    • Switches
      – Idle Timer
      – Lift Arm Positioner
      – Transmission Neutralizer Override Switch
      – Transmission Pressure ABA Park Brake Engagement
  • Operator Environment
    • Operator’s Station ROPS/FOPS Enclosed:
      – Air Conditioning
      – Cab Pressurizer and Filter
      – Dome Light
      – Door Strut
      – Heater
      – Radio Ready Compartment for Radio and Speakers
      – Wiper Control, Intermittent
    • Instrumentation/gauges:
      – Brake pressures
    • Secondary Steering System
  • Power Train
    • Engine:
      – After-Treatment Options – DPF (Flow Through)
    • Reversible Steering
    • Park Brake Automatic Activation
    • Park Brake Switch Engagement – Push to Apply/Pull to Apply
    • Radiator, High Efficiency

2.5m3 (3.2 yds3) for R1300G

2.8m3 (3.7 yds3) for R1300G

3.1m3 (4.1 yds3) for R1300G

3.4m3 (4.4 yds3) for R1300G

2.4m3 (3.2 yds3) for R1300G

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN




STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

            
Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here