Exterior View
Interior View
Net Power

69.5 hp

Operating Weight

21091 lb

Dig Depth

182.8 in

309 CR Mini Hydraulic Excavator

ABOUT THE 309 CR

The Cat® 309 CR Mini Excavator delivers maximum power and performance in a mini size to help you work in a wide range of applications.

Add the 309 CR MINI Model to the Cart
Net Power
69.5hp
Engine Model
Cat C3.3B
Rated Net Power – 2,200 rpm – U.S. EPA Tier 4 Final/EU Stage V – ISO 9249/EEC 80/1269
69.5hp
Displacement
203in³
Bore
3.7in
Stroke
4.7in
Gross Power – SAE J1995
74.3hp
Operating Weight
21091lb
Minimum Operating Weight with Cab*
19735lb
Maximum Operating Weight with Cab**
21091lb
Note (1)
*Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket.
Note (2)
**Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket.
Dig Depth
182.8in
Boom In Reach
126.6in
O/A Undercarriage Length
126in
O/A Track Width
97.2in
Stick Length
92.8in
Maximum Blade Height
16.1in
Maximum Reach
300.7in
Cab Height
100in
Ground Clearance
14in
Boom Swing – Left
23.8in
Note
*Boom Height when stick is pinned in transport position with no attachments.
Note (2)
***With blade positioned at the rear of the machine.
Note (1)
**Boom Height when stick is pinned in working position with attachments Standard Stick offers only one pin position.
Overall Shipping Length – with Counterweight
7052 mm (277.6 in)***
Overall Shipping Length – without Counterweight
7052 mm (277.6 in)***
Maximum Dump Clearance
199.7in
Vertical Wall
134in
Maximum Blade Depth
26in
Maximum Dig Height
277.1in
Tail Swing with Counterweight
62.4in
Swing Bearing – Height
29.7in
Track Belt/Shoe Width
17.7in
Boom Swing – Right
36.8in
Tail Swing without Counterweight
57.1in
Maximum Reach – Ground Level
293.7in
Height – Boom Transport – No Tools*
89in
Height – Boom Working – With Tools**
120.1in
Height
17in
Width – Wide
104in
Width – Standard
97in
Maximum Traction Force – Low Speed
19064lb
Ground Pressure – Maximum Weight
5.4psi
Gradeability – Maximum
30 degrees
Ground Pressure – Minimum Weight
5psi
Travel Speed – High
3.1mile/h
Travel Speed – Low
1.6mile/h
Maximum Traction Force – High Speed
6497lb
Engine Oil
3gal (US)
Fuel Tank
39gal (US)
Hydraulic System
29gal (US)
Cooling System
2.6gal (US)
Hydraulic Tank
14gal (US)
Type
Load Sensing Hydraulics with Variable Displacement Piston Pump
Operating Pressure – Swing
3626psi
Digging Force – Stick – Standard
9500lb
Digging Force – Stick – Long
8023lb
Operating Pressure – Travel
4134psi
Pump Flow at 2,400 rpm
62gal/min
Digging Force – Bucket
13943lb
Operating Pressure – Equipment
4134psi
Note
Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Maximum Auxiliary Circuit – Secondary – Flow at Pump
9gal/min
Maximum Auxiliary Circuit – Primary – Pressure at Pump
4134psi
Maximum Auxiliary Circuit – Primary – Flow at Pump
35gal/min
Maximum Auxiliary Circuit – Secondary – Pressure at Pump
4134psi
Maximum Auxiliary Circuit – High Flow – Pressure at Pump
4134lbf/in
Maximum Auxiliary Circuit – High Flow – Flow at Pump
37gal/min
Machine Swing Speed
10.6r/min
Boom Swing – Right
50 degrees
Boom Swing – Left
60 degrees
Roll Over Protective Structure (ROPS)
ISO 12117-2:2008
Top Guard
ISO 10262:1998 (Level I)
Tip Over Protective Structure (TOPS)
ISO 12117:1997
Note
European Union Directive “2000/14/EC”
Operator Sound Pressure (ISO 6396:2008)
72dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)
99dB(A)
Boom Swing – Right
36.8in
Cab Height
100in
Maximum Reach
281.1in
Boom In Reach
120.4in
Note
*Boom Height when stick is pinned in transport position with no attachments.
Note (2)
***With blade positioned at the rear of the machine.
Note (1)
**Boom Height when stick is pinned in working position with attachments Standard Stick offers only one pin position.
Maximum Dump Clearance
187.4in
Tail Swing without Counterweight
57.1in
Maximum Reach – Ground Level
273.6in
O/A Undercarriage Length
126in
Swing Bearing – Height
29.7in
Maximum Dig Height
265.2in
Track Belt/Shoe Width
17.7in
O/A Track Width
97.2in
Ground Clearance
14in
Tail Swing with Counterweight
62.4in
Vertical Wall
117.8in
Dig Depth
161.7in
Stick Length
71.8in
Boom Swing – Left
23.8in
Maximum Blade Height
16.1in
Maximum Blade Depth
26in
Overall Shipping Length – without Counterweight
266.7in
Overall Shipping Length – with Counterweight
266.7in
Height – Boom Transport – No Tools*
95.7in
Height – Boom Working – With Tools**
104.7in
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Steel Tracks with Pads
728lb
Long Stick
146lb
Counterweight
552lb
Recyclability
96%
Note
The 309 CR specifications are based on a machine configured with a Long (L) Undercarriage.
  • Engine
    • Cat C3.3B Diesel Engine (U.S. EPA Tier 4 Final/EU Stage V) – Electronic Engine, Turbo, Diesel Particulate Filter (DPF)
    • Automatic Engine Idle
    • Automatic Engine Shutdown
    • Automatic Swing Brake
    • Automatic Two Speed Travel
    • Fuel Water Separator with Indicator
    • Radial Seal – Double Element Air Filter
    • Extended Life Coolant, –37° C (–35° F)
  • Hydraulics
    • Electronic Variable Displacement Piston Pump
    • Load Sensing/Flow Sharing Hydraulics
    • Dedicated Auxiliary Hydraulic Pump
    • Power On Demand
    • Hydraulic Temperature Monitoring
    • Certified Accumulator
    • HYDO Advanced Hydraulic Oil
    • Ecology Drain
  • Operator Environment
    • Top Guard ISO 10262 1998 Level I
    • ROPS ISO 12117-2:2008
    • Stick Steer Mode
    • Travel Cruise Control
    • Control Pattern Changer
    • Adjustable Wrist Rests
    • Molded Footrests
    • Removable, Washable Floor Mat
    • Travel Pedals and Hand Levers
    • Cat Key with Passcode Option
    • HVAC with Automatic Temperature Control
    • Hydraulic Lockout Controls
    • Integrated Lower Front Window
    • Assisted Front Window Overhead Storage
    • Rear Window Emergency Exit
    • Fabric, High Back, Suspension Seat
    • Retractable Seat Belt (75 mm/3 in)
    • Coat Hook
    • Cup Holder
    • LED Interior Light
    • Literature Holder
    • Mounting Bosses for Top and Front Guards
    • 12V Power Socket
    • Radio – Bluetooth, Auxiliary, Microphone, USB (charging only)
    • Skylight
    • Signaling/Warning Horn
    • Cab and (left side) Boom Work Lights
    • Utility Space for Mobile Phone
    • Next Generation Color LCD Monitor (IP66)
      – Jog Dial Interface
      – Fuel Level and Coolant Temperature Gauges
      – Maintenance and Machine Monitoring
      – Performance and Machine Adjustments
      – Numeric Security Code
      – Multiple Languages
      – Camera Ready (IP68 & IP69K)
      – Hour Meter with Wake Up Switch
  • Undercarriage
    • Greased and Lubricated Track
    • Tie Down Eyes on Track Frame
    • Dozer Blade
    • Dozer Float
    • Bolt-on, Reversible Wear Edge
  • Boom, Stick And Linkages
    • One Piece Boom (3400 mm/133.9 in)
    • Standard Stick (1820 mm/71.7 in)
    • Front Shovel Capable – Pin-on/Manual Coupler/Hydraulic Coupler (not available in all regions)
    • Thumb Ready (not available in all regions)
  • Electrical
    • 12 Volt Electrical System
    • 60 Ampere Alternator
    • Circuit Breaker
    • 900 CCA Maintenance Free Battery
    • Battery Disconnect
    • Ignition Key Stop Switch
    • Travel Alarm
  • Other
    • Locks on External Enclosure Doors
    • Lockable Fuel Cap
    • Beacon Socket
    • Rear Reflectors
  • Operator Environment
    • Push to Start with Bluetooth® Key
    • Air Suspension Heated Seat
    • Rain Visor
    • Next Generation Advanced Monitor (below are all included with Next Generation Advanced Monitor option)
      – Touch Screen
      – Site Reference System
      – High Definition Camera Capable (IP68 & IP69K)
      – Numeric Security Code
  • Undercarriage
    • Wide Dozer Blade
    • Steel Tracks (450 mm/17.7 in wide)
    • Wide Steel Tracks (600 mm/23.6 in)
    • Steel Track with Rubber Pads
    • Track Guides
  • Boom, Stick And Linkages
    • Long Stick (2360 mm/92.9 in)
    • Attachments including Buckets, Augers and Hammers
    • 2nd Auxiliary Hydraulic Lines with Case Drain
    • Boom Lowering Check Valve
    • Stick Lowering Check Valve
    • Certified Lifting Eye
  • Electrical
    • Product Link Elite (regulations apply)
    • Rearview Camera
    • Rotating Beacon
  • Guarding
    • Mesh Front Guard ISO 10262 1998 Level I
    • Heavy Duty Front Guard ISO 10262 1998 Level II
    • Top Guard ISO 10262 1998 Level II
    • Polycarbonate Front Window EN356 P5A (Cab Only)
    • Track Guards
  • Other
    • Additional Counterweight
    • Water Jacket Heater
    • Refueling Pump
    • Variable Angle Boom (refer to 309 CR VAB brochure for VAB specs and additional information)

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here