Exterior View
Interior View
Net Power

54.8 hp

Operating Weight

17905 lb

Dig Depth

182.8 in

307.5 Mini Hydraulic Excavator

ABOUT THE 307 5

The Cat® 307.5 Mini Excavator delivers maximum power and performance in a mini size to help you work in a wide range of applications.

This 307 5 model is not yet in your cart.
Click on the add to cart button to build an equipment list.
Add the 307 5 MINI Model to the Cart
Net Power
54.8hp
Engine Model
Cat C2.4 Turbo
Displacement
148in³
Gross Power – SAE J1995
57.9hp
Bore
3.4in
Stroke
4in
Rated Net Power – 2,400 rpm – U.S. EPA Tier 4 Final/EU Stage V – ISO 9249/EEC 80/1269
54.8hp
Operating Weight
17905lb
Note (2)
**Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket.
Maximum Operating Weight with Cab**
17905lb
Minimum Operating Weight with Cab*
16549lb
Note (1)
*Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket.
Dig Depth
182.8in
Cab Height
100in
Maximum Blade Height
14.6in
Track Belt/Shoe Width
17.7in
Maximum Dump Clearance
225.1in
O/A Undercarriage Length
108.7in
O/A Track Width
86.6in
Vertical Wall
161.9in
Width over Upper House
88.6in
Boom In Reach
88.6in
Stick Length
86.9in
Tail Swing with Counterweight
76in
Maximum Reach
267.9in
Ground Clearance
14.6in
Swing Bearing – Height
29.7in
Tail Swing without Counterweight
70.9in
Maximum Dig Height
305.7in
Maximum Blade Depth
16in
Maximum Reach – Ground Level
262.6in
Height – Boom Transport – No Tools
100.4in
Overall Shipping Length – without Counterweight
240.9in
Overall Shipping Length – with Counterweight
246.1in
Note (1)
Boom Height when stick is pinned in transport position with no attachments.
Height – Boom Working – With Tools
124in
Note (2)
Boom Height when stick is pinned in working position with attachments.
Height
17in
Width
90in
Note (2)
Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position.
Overall Shipping Length – without Counterweight
240.2in
Height – Boom Transport – No Tools
101.2in
Note (1)
Boom Height when stick is pinned in transport position with no attachments.
Tail Swing with Counterweight
76in
Vertical Wall
141.6in
Tail Swing without Counterweight
70.9in
Stick Length
65.6in
Boom In Reach
66.2in
Track Belt/Shoe Width
17.7in
Ground Clearance
14.6in
O/A Track Width
86.6in
Maximum Reach – Ground Level
242.1in
O/A Undercarriage Length
108.7in
Width over Upper House
88.6in
Maximum Reach
247.9in
Swing Bearing – Height
29.7in
Maximum Blade Height
14.6in
Maximum Blade Depth
16in
Dig Depth
161.4in
Maximum Dump Clearance
208.6in
Cab Height
100in
Maximum Dig Height
289.3in
Height – Boom Working – With Tools
107.5in
Overall Shipping Length – with Counterweight
245.3in
Recyclability
96%
Long Stick
181lb
Counterweight
552lb
Steel Tracks with Pads
628lb
Maximum Traction Force – Low Speed
14035lb
Maximum Traction Force – High Speed
5856lb
Travel Speed – High
3.1mile/h
Ground Pressure – Maximum Weight
5.5psi
Travel Speed – Low
1.9mile/h
Gradeability – Maximum
30 degrees
Ground Pressure – Minimum Weight
5.1psi
Cooling System
2.6gal (US)
Hydraulic System
29gal (US)
Hydraulic Tank
14gal (US)
Fuel Tank
38gal (US)
Engine Oil
2.5gal (US)
Type
Load Sensing Hydraulics with Variable Displacement Piston Pump
Operating Pressure – Swing
3626psi
Note
Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Pump Flow at 2,400 rpm
44gal/min
Digging Force – Stick – Standard
8504lb
Operating Pressure – Travel
4134psi
Operating Pressure – Equipment
4134psi
Digging Force – Stick – Long
7579lb
Digging Force – Bucket
12272lb
Maximum Auxiliary Circuit – Secondary – Flow at Pump
9gal/min
Maximum Auxiliary Circuit – Secondary – Pressure at Pump
4134psi
Maximum Auxiliary Circuit – Primary – Flow at Pump
35gal/min
Maximum Auxiliary Circuit – Primary – Pressure at Pump
4134psi
Machine Swing Speed
10r/min
Roll Over Protective Structure (ROPS)
ISO 12117-2:2008
Top Guard
ISO 10262:1998 (Level I)
Tip Over Protective Structure (TOPS)
ISO 12117:1997
Operator Sound Pressure (ISO 6396:2008)
72dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)
98dB(A)
Note
European Union Directive “2000/14/EC”
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains .90 kg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes.
  • Engine
    • Cat C2.4 Diesel Engine (U.S. EPA Tier 4 Final/EU Stage V) – Electronic Engine, Turbo, Diesel Particulate Filter (DPF)
    • Automatic Engine Idle
    • Automatic Engine Shutdown
    • Automatic Swing Brake
    • Automatic Two Speed Travel
    • Fuel Water Separator with Indicator
    • Radial Seal – Double Element Air Filter
    • Extended Life Coolant, –37° C ( –37° F)
  • Hydraulics
    • Smart Tech Electronic Pump
    • Variable Displacement Piston Pump
    • Load Sensing/Flow Sharing Hydraulics
    • Power On Demand
    • Hydraulic Temperature Monitoring
    • Certified Accumulator
    • HYDO Advanced Hydraulic Oil
  • Operator Environment
    • Top Guard ISO 10262 1998 Level I
    • ROPS ISO 12117-2:2008
    • Stick Steer Mode
    • Travel Cruise Control
    • Control Pattern Changer
    • Adjustable Wrist Rests
    • Molded Footrests
    • Removable, Washable Floor Mat
    • Travel Pedals and Hand Levers
    • Cat Key with Passcode Option
    • HVAC with Automatic Temperature Control
    • Hydraulic Lockout Controls
    • Integrated Lower Front Window
    • Assisted Front Window Overhead Storage
    • Rear Window Emergency Exit
    • Fabric, High Back, Suspension Seat
    • Retractable Seat Belt (75 mm/3 in)
    • Coat Hook
    • Cup Holder
    • LED Interior Light
    • Literature Holder
    • Mounting Bosses for Top and Front Guards
    • 12V Power Socket
    • Radio – Bluetooth®, Auxiliary, Microphone, USB (charging only)
    • Skylight
    • Signaling/Warning Horn
    • Cab and (left side) Boom Work Lights
    • Utility Space for Mobile Phone
    • Next Generation Color LCD Monitor (IP66)
      – Jog Dial Interface (cab machines only)
      – Fuel Level and Coolant Temperature Gauges
      – Maintenance and Machine Monitoring
      – Performance and Machine Adjustments
      – Numeric Security Code
      – Multiple Languages
      – Camera Ready (IP68 & IP69K)
      – Hour Meter with Wake Up Switch
  • Undercarriage
    • Greased and Lubricated Track
    • Tie Down Eyes on Track Frame
    • Dozer Straight Blade
    • Dozer Float
    • Bolt-on, Reversible Wear Edge
  • Boom, Stick And Linkages
    • One Piece Boom (3700 mm/145.7 in)
    • Standard Stick (1665 mm/65.6 in)
    • Front Shovel Capable – Pin-on/Manual Coupler/Hydraulic Coupler for Cat Tools
    • Thumb Ready (not available in all regions)
    • Certified Lifting Eye (optional in some regions)
  • Electrical
    • 12 Volt Electrical System
    • 90 Ampere Alternator
    • 900 CCA Maintenance Free Battery
    • Battery Disconnect
    • Ignition Key Stop Switch
    • Product Link Basic (regulations apply)
    • Travel Alarm
  • Other
    • Locks on External Enclosure Doors
    • Lockable Fuel Cap
    • Beacon Socket
    • Rear Reflectors
  • Operator Environment
    • Air Suspension Heated Seat
    • Rain Visor
    • Next Generation Advanced Monitor (below are all included with Next Generation Advanced Monitor option)
      – Jog Dial Control Interface
      – Touch Screen
      – Site Reference System
      – High Definition Camera Capable (IP68 & IP69K)
      – Numeric Security Code
  • Undercarriage
    • Steel Tracks (450 mm/17.7 in wide)
    • Wide Steel Tracks (600 mm/23.6 in)
    • Steel Track with Rubber Pads
    • Track Guides
  • Boom, Stick And Linkages
    • Long Stick (2200 mm/86.6 in)
    • Attachments including Buckets, Augers and Hammers
    • 2nd Auxiliary Hydraulic Lines
    • Boom Lowering Check Valve
    • Stick Lowering Check Valve
    • Bucket Linkage with Lift Eye
  • Electrical
    • Product Link Elite (regulations apply)
    • Rearview Camera
    • Rotating Beacon
  • Guarding
    • Heavy Duty Front Guard ISO 10262 1998 Level II
    • Mesh Front Guard ISO 10262 1998 Level I
    • Overhead Cab Guard ISO 10262 1998 Level II
    • Polycarbonate Front Window EN356 P5A (Cab Only)
    • Track Guards
  • Other
    • Water Jacket Heater
    • Refueling Pump

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here