Exterior View
Exterior View
Interior View
Interior View
Engine Output – SAE J1995

3015 hp

Bucket Payload

67 ton (US)

Operating Weight

660 ton (US)

6060 Hydraulic Mining Shovel

ABOUT THE 6060 MINING

The Cat® 6060 Hydraulic Mining Shovel is the industry’s most popular hydraulic shovel in its size class. And for good reason. With its rated payload of 61 tonnes (67 tons), the Cat 6060 was the first shovel in the mining industry tailor-made for mines using 240-ton (218-tonne) haul trucks, providing an efficient truck-shovel system solution to meet production capacity in these environments. Today’s 6060 remains the ideal shovel for these applications, with improvements and enhancements in durability and reliability to deliver the uptime you demand. And its powerful engine and efficient hydraulic system allow higher working speeds for fast cycle times. The result is higher productivity and lower overall owning and operating costs.

Add the 6060 MINING SHOVEL Model to the Cart
Engine Output – SAE J1995
3015hp
Bucket Payload
67ton (US)
Operating Weight
660ton (US)
Note
Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available.
Engine Model
2 x Cat 3512E
Rated Speed
1,800 min-1 (1,800 rpm)
Number of Cylinders – Each Engine
12
Bore
6.69in
Stroke
8.46in
Displacement
3574in³
Aspiration
Turbocharged and charge air-cooled
Components (1)
Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs)
Components (2)
High-capacity water separator
Components (3)
Two-stage fuel filter with series filtration
Components (4)
Heavy-duty air filters
Components (5)
Microprocessed engine management
Components (6)
Hydraulically driven radiator fan with electronically controlled fan speed
Components (7)
Exhaust manifold and turbo heat shields
Gross Power – SAE J1995
3025hp
Net Power – ISO 9249
2990hp
Net Power – SAE J1349
2821hp
Emissions
Optimized for fuel consumption.
Gross Power – SAE J1995
3015hp
Net Power – SAE J1349
2810hp
Net Power – ISO 9249
2979hp
Emissions
Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions.
System Voltage
24 V
Batteries in Series/Parallel Installation
6 x 210 Ah; 12 V each; 630 Ah 24 V in total
Components (1)
6 maintenance-free batteries
Components (2)
Lockable battery isolator switch
Components (3)
Lockable starter isolator switch
Components (4)
13 LED high-brightness working flood lights
Components (5)
17 LED service lights
Components (6)
2 electric horns (1 cab module; 1 oil cooler module)
6060 FS – Standard Track Pads
4.58ft
6060 FS – Operating Weight
1320110lb
6060 FS – Ground Pressure
26.6 N/cm2 (38.5 psi)
Backhoe – Standard Track Pads
4.58ft
Backhoe – Operating Weight
1323860lb
Backhoe – Ground Pressure
26.7 N/cm2 (38.7 psi)
Note
Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants.
Fuel Tank
3136gal (US)
Hydraulic Tank
1876gal (US)
Hydraulic System – Including Tank
2483gal (US)
Engine Oil
86.6gal (US)
Cooling System
211.4gal (US)
Swing Drive
42.4gal (US)
Grease Tank
188gal (US)
Main Pumps – Diesel Version
8 variable swash plate pumps
Main Pumps – Maximum Oil Flow – Diesel Version
8 x 650 L/min (8 x 172 gal/min)
Maximum Pressure – Attachment
4640psi
Maximum Pressure – Travel
5220psi
Swing Pumps – Diesel Version
4 reversible swash plate pumps
Swing Pumps – Maximum Oil Flow – Diesel Version
4 x 352 L/min (4 x 93 gal/min)
Maximum Pressure – Swing Pumps
5075psi
Oil Flow of Cooling Pumps
4 x 488 L/min (4 x 129 gal/min)
Components
4 cooling fans
Diameter – Fan
46in
Features (1)
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Features (2)
Fan speed and flow of oil to the coolers are thermostatically controlled
Features (3)
Extremely high cooling efficiency to ensure optimum oil temperature
Features (4)
Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
Swing Drive
4 compact planetary transmissions with axial piston motors
Parking Brakes
Wet multiple disc brake, spring loaded/hydraulically released
Maximum Swing Speed
3.8r/min
Swing Ring
Triple-race roller bearing with sealed internal gearing
Features (1)
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Features (2)
Closed-loop swing circuit with torque control
Features (3)
Hydraulic braking of the swing motion by counteracting control
Features (4)
All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
Travel Speed – 1st Stage – Maximum
0.68mile/h
Travel Speed – 2nd Stage – Maximum
0.99mile/h
Maximum Tractive Force
661160lb
Gradeability – Travel Drives – Maximum
39%
Track Pads – Each Side
42
Bottom Rollers – Each Side
7
Support Rollers – Each Side
2 plus a skid plate in between
Travel Drives – Each Side
1 planetary transmission with 2 two-stage axial piston motors
Components (1)
HD tracks with cast double-grouser track pad
Components (2)
HD fixed axle rollers and idlers
Components (3)
Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas
Components (4)
Acoustic travel alarm (forward and reverse)
Components (5)
Fully hydraulic, self-adjusting track tensioning system with piston accumulator
Components (6)
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Operator’s Eye Level – Approximately
24.91ft
Internal Dimensions of Cab – Length
7.33ft
Internal Dimensions of Cab – Width
5.33ft
Internal Dimensions of Cab – Height
6.75ft
Components (1)
Single hydraulically driven HVAC System, with dual system option
Components (2)
In-floor window with removable grate
Components (3)
Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support
Components (4)
Independently adjustable seat consoles with integrated joysticks
Components (5)
Operator Protective Guard (Top Guard) (ISO 10262:1998)
Components (6)
Elevated full-size trainer seat with safety belt and laptop desk
Components (7)
Additional fold-away auxiliary seat with safety belt
Components (8)
Operator Presence switch
Components (9)
Monitoring system with 254 mm (10 in) touch screen
Components (10)
Powered 45 degree access stairway
Components (11)
Emergency egress ladder
Components (12)
FM/AM radio with USB and AUX input
Components (13)
Roller blinds on 3 front windows
Components (14)
3 cup holders
Components (15)
Cat Electronic Technician service port
Capacity – Grease Container
188gal (US)
Type (1)
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
Type (2)
System failures displayed by monitoring system
Type (3)
Grease filters (200 µm) between service station and container as well as directly behind grease pump
Type (4)
Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)
Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)
Constant boom momentum throughout the entire lift arc; Crowd force assistance
All buckets (FS and BH) are equipped with a wear package consisting of: (1)
Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
All buckets (FS and BH) are equipped with a wear package consisting of: (2)
Wing shrouds on side walls and heel shrouds at bottom edges
Type (1)
Catwalks with rails at booms (FS and BH)
Type (2)
Guards for shovel cylinders (FS)
Type (3)
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type (4)
Service access holes from both sides of boom (FS and BH) and stick (FS)
Type (5)
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type (6)
Booms and sticks are stress-relieved after welding
Type (7)
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
Type (8)
Special wear packages for highly abrasive materials available upon request
Maximum Crowd Force
494410lb
Maximum Breakout Force
388780lb
Maximum Digging Height
51.17ft
Maximum Digging Reach
54.17ft
Maximum Digging Depth
9.17ft
Face Shovel (heaped 2:1)
44.5yd³
Backhoe (heaped 1:1)
44.5yd³
Stick Digging Force – ISO
295740lb
Bucket Digging Force – ISO
274840lb
Maximum Digging Height
52.83ft
Maximum Digging Reach
62.33ft
Maximum Digging Depth
29.17ft
Installation
Retractable service station installed underneath the engine module and easily accessible from ground.
Equipped With (1)
Quick couplings for: Diesel fuel, Engine coolant – left/right engine, Pump transmission gear oil – left/right engine, Engine oil – left/right engine, Hydraulic oil tank, and grease container
Equipped With (2)
Cat jump-start socket
Equipped With (3)
Indicator lights
  • 2 x Cat 3512E engines
  • Cat Powertrain
    • Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
    • Air-to-Air After Cooling (ATAAC)
    • Turbocharger
    • Hydraulically driven radiator fan
    • Electronically controlled fan speed
    • Micro processed engine management
    • Heavy-duty air filters
    • Two-stage fuel filter with series filtration
    • High-capacity water seperator
    • Starting aid — automatic ether
    • Exhaust manifold and turbo heat shields
    • Dual 24 V electric starters per engine
    • Automatic engine idle shut down
    • Automatic fuel priming
  • Hydraulics
    • Hydraulic Optimization
    • Operator Assist: Enhanced Motion Control
    • Cat Hydraulic Hose assemblies
    • Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
    • Pressure cut-off for main pumps
    • Cooling of pump transmission gear oil
    • Closed loop swing circuit
    • Pressure testing points
    • Full-flow high-pressure filters (100 μm), main pumps
    • High pressure filters (100 μm), closed swing circuit
    • Full-flow filters (10 μm), return circuit
    • Pressure filters swing charge circuit (40 μm)
    • Pressure filters pilot circuit (6 μm)
    • Transmission oil filters (40 μm)
    • Boom float valve (FS and BH)
    • Stick float valve (FS)
  • Electrical System
    • 6 Maintenance-free batteries
    • Lockable battery isolator switch
    • Lockable starter isolator switch
    • 13 LED high-brightness working flood lights
    • 17 LED service lights
    • 2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
    • 2 electric horns (1 cab module, 1 oil cooler module)
  • Undercarriage
    • HD tracks with cast double-grouser track pads
    • 1400 mm (4’7″) wide track pads
    • HD fixed axle carrier and load rollers
    • HD fixed axle idlers
    • Automatic hydraulic retarder valve
    • Hinged travel motor covers
    • Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
    • Fully hydraulic self-adjusting track tensioning system with piston accumulators
  • Automatic Lubrication System
    • Rectangular grease container (fill via service station)
    • Lubricated pinion in swing ring
    • Grease filters (200 μm)
  • Operator Environment
    • Single hydraulically driven HVAC system
    • In-floor window with removable grate
    • Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
    • Independently adjustable seat consoles with integrated joysticks
    • Electronic-Hydraulic Servo Control
    • Elevated full-size trainer seat with 2-point safety belt and laptop desk
    • Additional fold-away auxiliary seat with 2-point safety belt
    • Three cup holders
    • FM/AM radio with USB and AUX input
    • Parallel intermittent wiper/washer
    • Roller blinds
    • Monitoring system with 254 mm (10 in) color touchscreen
    • 45° stairway from engine bay to operator cab
    • Powered 45° access stairway
    • Heated mirror on LH side
    • Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
    • Level indicators for length and crosswise inclination
    • Document Storage
  • Front Attachment
    • Service access holes from both sides in boom and stick (FS and BH)
    • Boom and stick thermally stress relieved after welding
    • Catwalks with rails at boom (FS and BH)
    • Wear Package (as per bucket selection)
  • Cat Technology
    • Cat Product Link Elite (Cellular)
    • Cat MineStar Solutions Ready
  • Service And Maintenance
    • Engine oil exchange interval — 500 hours
    • Hydraulic oil change interval -10,000 hours
    • Scheduled Oil Sampling (S·O·SSM) ports
    • Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
    • Cat battery charging connector
    • Indicator lights
    • Cat Electronic Technician service port
    • Dirt wiper at swivel
  • Safety And Security
    • Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
    • Operator Protective Guard (Top Guard)
    • All-round safety glass
    • Emergency egress ladder
  • Maintenance
    • ISO or ANSI decals
  • General
    • Custom paint
  • Superstructure
    • Oil change interval extension for engine oil up to 500 hours, with optional extension to 1,000 hours
    • Rectangular grease container, 710 L (188 gal), filled via service station
    • Various cold-weather options for temperatures below -10°; 400 V, 50 Hz and 208 V, 60 Hz
  • Cab
    • Dual hydraulically driven HVAC system for redundancy
    • Cab heating
    • Camera monitoring system with two cameras, two lights, and additional display
  • Undercarriage
    • Track pad width 1400 mm (4 ft 7 in)
    • Belly plate for undercarriage protection
    • Additional optional equipment available on request.

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here