Find your Louisiana Cat
(866) 843-7440
Contact Us
Exterior View
Exterior View
Interior View
Interior View
Engine Output – SAE J1995

2079 hp

Bucket Payload

43.7 ton (US)

Operating Weight

446 ton (US)

6040 Hydraulic Mining Shovel

ABOUT THE 6040 MINING

The Cat® 6040 Hydraulic Mining Shovel is trusted on sites around the world — consistently delivering the the productivity you demand with the durability you expect. This proven shovel is known for top performance and high reliability, backed by the on-the-ground support of the Cat dealer network.

But we’re always looking for ways to make the 6040 better. We’ve made improvements that enable peak production — delivering fast cycle times and high digging forces. We’ve increased uptime by making the 6040 more reliable and easier to service. And it’s now available for both highly regulated and lesser regulated countries with engines that meet U.S. EPA Tier 4 Final/EU Stage V standards without the need for DEF — saving time and cost during maintenance.

            
Add the 6040 MINING SHOVEL Model to the Cart
Request a Quote View rental options Apply for credit
Engine Output – SAE J1995
2079hp
Bucket Payload
43.7ton (US)
Operating Weight
446ton (US)
Note
Specifications above apply to the HRC Face Shovel configuration. Backhoe and Frontless configurations are also available for both HRC and LRC.
Engine Model
2 x Cat C32
Gross Power – SAE J1995:2014
2079hp
Net Power – SAE J1349:2011
1915hp
Note
Power output relates to highly regulated engines. Lesser regulated engines are also available.
Number of Cylinders – Each Engine
12
Bore
5.71in
Stroke
6.38in
Displacement
1959in³
Aspiration
Turbocharged and air-to-air aftercooled
Components (1)
Additional high-capacity water separator
Components (2)
Two-stage fuel filter including water separator
Components (3)
Heavy-duty air filters
Components (4)
Microprocessed engine management
Components (5)
Hydraulically driven radiator fan with electronically controlled fan speed
Fuel Tank Capacity
2098gal (US)
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards
System Voltage
24V
Batteries in Series/Parallel Installation
6 x 210 Ah – 12 V each; 630 Ah – 24 V in total
Components (1)
6 maintenance-free batteries
Components (2)
Battery isolation relays and switches
Components (3)
Emergency stop switches accessible from ground level, in engine module and in operator’s cab
Components (4)
14 LED high-brightness working flood lights
Components (5)
11 LED high-brightness service lights
6040 FS – Standard Track Pads
3.9ft
6040 FS – Operating Weight
891980lb
6040 FS – Ground Pressure
24.1 N/cm2 (35.0 psi)
6040 – Standard Track Pads
3.9ft
6040 – Operating Weight
897930lb
6040 – Ground Pressure
24.3 N/cm2 (35.3 psi)
Note
1600 mm track pads available as option
6040 FS – Note
Other track pads available on request
Hydraulic Tank Capacity – Diesel Version – Approximately
898gal (US)
Total Volume of Hydraulic Oil – Diesel Version – Approximately
1532gal (US)
Main Pumps – Diesel Version
4 x variable swash plate pumps
Main Pumps – Maximum Oil Flow – Diesel Version
4 x 724 L/min (4 x 191 gal/min)
Maximum Pressure – Attachment
4350psi
Maximum Pressure – Travel
5080psi
Swing Pumps – Diesel Version
4 x reversible swash plate pump
Swing Pumps – Maximum Oil Flow – Diesel Version
4 x 321 L/min (4 x 85 gal/min)
Maximum Pressure – Swing Pumps
5080psi
Diameter – Fan
60in
Oil Flow of Cooling Pumps – Diesel Version
2 x 799 L/min (2 x 211 gal/min)
Features (1)
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Features (2)
Fan speed is thermostatically controlled
Features (3)
Extremely high cooling efficiency to ensure optimum oil temperature
Components (1)
Gear type cooling pumps supplying high-volume, low-pressure oil to aluminum coolers
Components (2)
Variable axial piston pumps supplying low-volume, high-pressure oil to fans
Diameter – Fan
2 × 1524 mm (2 × 60 in)
Swing Drive
3 compact planetary transmissions with axial piston motors
Parking Brake
Wet multiple disc brake, spring-loaded/hydraulically released
Maximum Swing Speed – Diesel Version
4.7r/min
Swing Ring
Triple-race roller bearing with sealed internal gearing
Features (1)
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Features (2)
Closed-loop swing circuit with torque control
Features (3)
Hydraulic braking of the swing motion by counteracting control
Features (4)
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
Travel Speed – 1st Stage – Maximum
0.93mile/h
Travel Speed – 2nd Stage – Maximum
1.55mile/h
Maximum Tractive Force
471260lb
Gradeability – Travel Drives – Maximum
57%
Track Pads – Each Side
42
Bottom Rollers – Each Side
7
Support Rollers – Each Side
2 plus a skid plate in between
Travel Drives – Each Side
1 planetary transmission with 2 two-stage axial piston motors
Parking Brake
Wet multiple disc brake, spring applied/hydraulically released
Components (1)
All running surfaces of sprockets, idlers, rollers and track links are hardened
Components (2)
Acoustic travel alarm
Components (3)
Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
Components (4)
All teeth contact areas of sprocket and pad links are hardened
Components (5)
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
Components (6)
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Operator’s Eye Level – Approximately
22.31ft
Internal Dimensions of Cab – Length
7.22ft
Internal Dimensions of Cab – Width
5.25ft
Internal Dimensions of Cab – Height
7.05ft
Components (1)
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components (2)
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
Components (3)
Roller blinds at all windows
Components (4)
Windshield with parallel intermittent wiper/washer
Components (5)
All-round safety glass, armored windshield and sliding side window
Components (6)
Operator Protective Guard (Top Guard)
Components (7)
Single HVAC with option for Dual HVAC
Components (8)
Joystick controls integrated in independently adjustable seat consoles
Components (9)
Fold-away auxiliary seat with safety belt
Components (10)
External sun shields at side and rear windows
Components (11)
Sliding emergency ladder (kick-down type) with ladder cage
Components (12)
Machine access via retractable access stairway, stairway angle approximately 45 degrees, hydraulically operated
Components (13)
Robust instrument panel including large colored BCS screen with transflective technology
Board Control System (BCS III) Features (1)
USB, Lan (TCP/IP) and CAN BUS interfaces for data export
Board Control System (BCS III) Features (2)
On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram)
Board Control System (BCS III) Features (3)
Robust instrument panel including large (12 in) colored touch screen for intuitive handling
Board Control System (BCS III) Features (4)
Electronic monitoring, data logging & diagnostic system for vital signs & service data of engines, hydraulic & lube systems
Board Control System (BCS III) Features (5)
On-screen troubleshooting assistance
Board Control System (BCS III) Features (6)
Graphic charts of logged data
Board Control System (BCS III) Features (7)
Fault memory with storage of related conditions
Capacity – Grease Container
188gal (US)
Type (1)
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control adjust the pause/lube times
Type (2)
System failures displayed by Board Control System
Type (3)
Grease filters (200 µm) between service station and container, as well as directly behind grease pump
Type (4)
Connected to the lubrication system are: – pivot points of attachment, bucket and cylinders
Type (5)
Connected to the lubrication system are: – raceways of the swing roller bearing – two greasing pinions for the internal gearing of the swing ring
All buckets (FS and BH) are equipped with a wear package consisting of: (1)
– Special liner material covering main wear areas inside and outside of bucket – Lip shrouds between teeth
All buckets (FS and BH) are equipped with a wear package consisting of: (2)
– Wing shrouds on side walls – Heel shrouds at bottom edges
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
– Automatic roll-back limiter to prevent material spillage – Kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)
– Horizontal automatic constant-angle bucket guidance – Vertical automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)
– Constant boom momentum throughout the whole lift arc – Crowd force assistance
Type (1)
Inspection hole in monoboom BH
Type (2)
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type (3)
Special wear packages for highly abrasive materials on request
Type (4)
Catwalks with rails at boom (FS and BH)
Type (5)
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type (6)
Boom and sticks are stress-relieved after welding
Type (7)
Boom and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel casting at pivot areas
Type (8)
Guards for shovel cylinders (FS)
Bucket Capacity – Backhoe (heaped 1:1)
28.8yd³
Bucket Capacity – Face Shovel (heaped 2:1)
28.8yd³
Installation
Retractable service station installed underneath the engine module and easily accessible from ground
  • Cat Powertrain
    • 2 x Cat 3512E engines
    • Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
    • Air-to-Air After Cooling (ATAAC)
    • Turbocharger
    • Hydraulically driven radiator fan
    • Electronically controlled fan speed
    • Micro processed engine management
    • Heavy-duty air filters
    • Two-stage fuel filter with series filtration
    • High-capacity water seperator
    • Starting aid — automatic ether
    • Exhaust manifold and turbo heat shields
    • Dual 24 V electric starters per engine
    • Automatic engine idle shut down
  • Hydraulics
    • Automatic fuel priming
    • Hydraulic Optimization
    • Operator Assist: Enhanced Motion Control
    • Cat Hydraulic Hose assemblies
    • Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
    • Pressure cut-off for main pumps
    • Cooling of pump transmission gear oil
    • Closed loop swing circuit
    • Pressure testing points
    • Full-flow high-pressure filters (100 μm), main pumps
    • High pressure filters (100 μm), closed swing circuit
    • Full-flow filters (10 μm), return circuit
    • Pressure filters swing charge circuit (40 μm)
    • Pressure filters pilot circuit (6 μm)
    • Transmission oil filters (40 μm)
    • Boom float valve (FS and BH)
    • Stick float valve (FS)
  • Electrical System
    • 6 Maintenance-free batteries
    • Lockable battery isolator switch
    • Lockable starter isolator switch
    • 13 LED high-brightness working flood lights
    • 17 LED service lights
    • 2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
    • 2 electric horns (1 cab module, 1 oil cooler module)
  • Undercarriage
    • HD tracks with cast double-grouser track pads
    • 1400 mm (4’7″) wide track pads
    • HD fixed axle carrier and load rollers
    • HD fixed axle idlers
    • Automatic hydraulic retarder valve
    • Hinged travel motor covers
    • Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
    • Fully hydraulic self-adjusting track tensioning system with piston accumulators
  • Automatic Lubrication System
    • Rectangular grease container (fill via service station)
    • Lubricated pinion in swing ring
    • Grease filters (200 μm)
  • Operator Environment
    • Single hydraulically driven HVAC system
    • In-floor window with removable grate
    • Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
    • Independently adjustable seat consoles with integrated joysticks
    • Electronic-Hydraulic Servo Control
    • Elevated full-size trainer seat with 2-point safety belt and laptop desk
    • Additional fold-away auxiliary seat with 2-point safety belt
    • Three cup holders
    • FM/AM radio with USB and AUX input
    • Parallel intermittent wiper/washer
    • Roller blinds
    • Monitoring system with 254 mm (10 in) color touchscreen
    • 45° stairway from engine bay to operator cab
    • Powered 45° access stairway
    • Heated mirror on LH side
    • Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
    • Level indicators for length and crosswise inclination
    • Document Storage
  • Front Attachment
    • Service access holes from both sides in boom and stick (FS and BH)
    • Boom and stick thermally stress relieved after welding
    • Catwalks with rails at boom (FS and BH)
    • Wear Package (as per bucket selection)
  • Cat Technology
    • Cat Product Link™ Elite (Cellular)
    • Cat MineStar™ Solutions Ready
  • Service And Maintenance
    • Engine oil exchange interval — 500 hours
    • Hydraulic oil change interval -10,000 hours
    • Scheduled Oil Sampling (S·O·SSM) ports
    • Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
    • Cat battery charging connector
    • Indicator lights
    • Cat Electronic Technician service port
    • Dirt wiper at swivel
  • Safety And Security
    • Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
    • Operator Protective Guard (Top Guard)
    • All-round safety glass
    • Emergency egress ladder
  • Miscellaneous
    • ISO or ANSI decals
  • General
    • Engine oil interval extension kit, up to 1,000 hrs
  • Superstructure
    • Round container(s) for standard 200 L (53 gal) barrels (instead of 710 L (188 gal) grease container)
    • Filling of round container(s) via service station
    • Various cold-weather options
  • Cab
    • Dual (redundancy) heating ventilating and air conditioning system
    • Cab heating
    • Camera monitoring system (two cameras and additional color display)
  • Undercarriage
    • Track pad width 1600 mm (5 ft 3 in) – Non HD
    • Automatic lubrication of rollers by central lube system
    • Belly plate for additional undercarriage protection
    • Additional optional equipment available on request.

15 m³ (19.6 yd³) Heavy Rock and Ore bucket for the 6040 Hydraulic Mining Shovel

22 m³ (28.8 yd³) Standard Rock bucket for the 6040 Hydraulic Mining Shovel

22 m³ (28.8 yd³) Standard Rock bucket for the 6040 Hydraulic Mining Shovel

20 m³ (26.2 yd³) Standard Rock bucket for the 6040 Hydraulic Mining Shovel

24 m³ (31.4 yd³) Light Rock bucket for the 6040 Hydraulic Mining Shovel

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN




STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

            
Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here