Maximum Rating

300 BHP

Emissions

EPA & CARB Non-Road Tier 3, EU Stage IIIA, IMO Tier II

Displacement

441.8 in³

C7 ACERT™ Dry Manifold Engine

ABOUT THE c7 ACERT

Cat C7 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C7 ACERT engines to deliver excellent performance with low operating costs and emissions. Applications powered by C7 ACERT engines include pump skids, acidizing units, cementing units, coil tubing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. The C7 ACERT engines, with ratings: 168-224 bkW (225-300 bhp) @ 1800-2200 rpm, meet China Stage II, EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

Add the C7 ACERT DRY MANIFOLD ENGINE Model to the Cart
Maximum Rating
300BHP
Displacement
441.8in³
Minimum Rating
225BHP
Governor and Protection
Electronic (ADEM™ 3)
Aspiration
Turbocharged-Aftercooled
Flywheel and Flywheel Housing
SAE 1, 2, or 3
Flywheel Teeth
156 (SAE 1), 134 (SAE 2), 126 (SAE 3)
Rotation from Flywheel End
Counterclockwise
Stroke
5in
Bore
4.3in
Emissions
EPA & CARB Non-Road Tier 3, EU Stage IIIA, IMO Tier II
Length
41.4in
Width
29.9in
Height
40.6in
Weight
1386lb
Lube Oil System – Refill
4.8gal (US)
  • Air Inlet System
    • Turbocharger, air to air aftercooled
    • Air inlet, LH side facing front 79.0 mm (3.11 in) connection
  • Control System
    • Electronic governing, PTO speed control
    • Programmable rating
    • Cold mode start strategy
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and TEL
    • Electronic diagnostics and fault logging
    • Programmable monitoring system (engine speeds, temperature, pressure)
    • J1939 broadcast (diagnostic and engine status)
    • Automatic variable timing, electronic
    • All engines shipped at max rated rpm
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump — belt-driven, centrifugal
    • Water pump, inlet RH front vertical inlet (pointing down)
  • Exhaust System
    • Exhaust manifold — dry
    • Front turbo exhaust
  • Fuel System
    • Hydraulic Electronic Unit injection (HEUI)
    • Fuel filter — secondary, LH front (2-micron high performance)
    • Fuel transfer pump — LH front
    • Fuel priming pump — LH front
  • General
    • Vibration damper
    • Paint — Cat yellow
    • Lifting eyes
    • Electronic installation kit (connectors, pins, sockets)
  • Lube System
    • Crankcase breather, LH side
    • Oil cooler, RH
    • Oil filler, front top valve cover
    • Oil filter and sampling valve, RH
    • Oil pan, front sump, 31 L (33 qt) oil change capacity
    • Oil dipstick, LH rear
    • Engine oil pump (gear-driven)
    • Engine shipped without oil
  • Power Take-offs
    • Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (0.88 in) wide
  • Air Compressor
    • Air compressors
    • Air compressor governor
  • Air Inlet System
    • Air cleaners
    • Precleaner
    • Air inlet elbow
    • Air shutoffs
  • Charging Systems
    • Charging alternators
    • Alternator mountings
    • Alternator belt tensioner
    • Alternator pulleys
    • Alternator guards
  • Cooling System
    • Radiators
    • Fan drive and pulley – f/u/w radiator packages
    • Fans f/u/w radiator packages
    • Coolant level sensor
    • Fan drive mountings
    • Fan adapters
    • Fan adapter for blower fans
    • Fan pulleys
    • Fan height instructions
    • Vee belts for customer-supplied radiators
    • Suction fans and blower fans
    • Water inlet elbows
    • Dry charge coolant conditioners
  • Emissions Certification
    • IMO Certification
  • Exhaust System
    • Flexible fitting
    • Turbocharger exhaust outlet adapters
    • Elbows, flange, pipes, clamp
    • Rain caps
    • Manifolds
    • Mufflers
  • Flywheels And Flywheel Housing
    • Crankshaft seal
  • Fuel System
    • Flexible fuel lines
    • Water separator and fuel filters
    • Fuel cooler
  • General
    • Tool set
  • Instrumentation
    • Gauges and instrument panels
    • Interconnect harnesses
    • Voltmeters
    • Gauge mounting
    • Ammeter
  • Lube System
    • Oil pan
    • Drain and cover
    • Oil level gauges
    • Remote oil filter
    • Oil fillers
    • Lubricating oil
    • Fumes disposal
  • Mounting System
    • Structural steel base
    • Front engine support
    • Rear engine supports
  • Power Take-offs
    • Enclosed clutch
    • Clutch supports
    • Flywheel stub shaft
    • Hydraulic pump drives
    • Hydraulic gear pumps
  • Starting System
    • Starting Aids
    • Electric Starting Motors — 12V and 24V
    • Battery Sets – 12V and 24V (dry)
    • Battery Cable




STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here