Exterior View
Interior View
Rated Gross Power – SAE J1995

170 hp

Operating Weight

27972 lb

Bucket Capacities

1.9-5.0 m3 (2.5-6.5 yd3)

926 Small Wheel Loader

ABOUT THE 926 SMALL

Cat® wheel loaders set the standard for productivity, fuel efficiency, operator comfort and low operating costs. The Cat 926 Small Wheel Loader features a high torque C7.1 engine that works in conjunction with an intelligent hydrostatic power train to deliver exceptional fuel efficiency. Meets U.S. EPA Tier 4 Final and EU Stage V emission standards, designed to manage itself so you can concentrate on your work. Extended service intervals to 1000 hours reduce fluid and filter use by up to 45% (compared to previous M Series models) while keeping operating cost low.

This 926 SMALL model is not yet in your cart.
Add the 926 SMALL Model to the Cart
Rated Gross Power – SAE J1995
170hp
Engine Model
Cat C7.1*
Performance Mode
Automatic
Rated Gross Power – Rated Engine Speed
1800r/min
Rated Gross Power – SAE J1995 (DIN)
172mhp
Rated Engine Power – ISO 14396
168hp
Rated Engine Power – ISO 14396 (DIN)
170mhp
Rated Net Power – SAE J1349 at Minimum Fan Speed
165hp
Rated Net Power – ISO 9249 at Minimum Fan Speed
165hp
Rated Net Power – ISO 9249 (DIN) at Minimum Fan Speed
167mhp
Maximum Gross Torque – Engine Speed
1400r/min
Maximum Gross Torque – SAE J1995
608ft·lbf
Maximum Gross Torque – ISO 14396
601ft·lbf
Maximum Net Torque – SAE J1349
593ft·lbf
Maximum Net Torque – ISO 9249
595ft·lbf
Displacement
427in³
Bore
4in
Stroke
5in
Note
*Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards.
Note (1)
Advertised power is tested per the specified standard in effect at the time of manufacture
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Operating Weight
27972lb
Operating Weight – High Lift
28767lb
Bucket Capacities
1.9-5.0 m3 (2.5-6.5 yd3)
Maximum Flow – Implement Pump
40gal/min
Maximum Flow – Implement Pump – 3rd Function Maximum Flow*
40gal/min
Maximum Flow – Implement Pump – 4th Function Maximum Flow*
40gal/min
Maximum Working Pressure – Implement Pump
3771psi
Relief Pressure – Tilt Cylinder
4061psi
Relief Pressure – Tilt Cylinder – 3rd and 4th Function Maximum Working Pressure
3771psi
Relief Pressure – Tilt Cylinder – 3rd and 4th Function Relief Pressure
4061psi
Lift Cylinder: Standard Lift Linkage – Bore Diameter
1.3in
Lift Cylinder: Standard Lift Linkage – Rod Diameter
2.4in
Lift Cylinder: Standard Lift Linkage – Stroke
28.7in
Tilt Cylinder: Standard Lift Linkage – Bore Diameter
5.5in
Tilt Cylinder: Standard Lift Linkage – Rod Diameter
3in
Tilt Cylinder: Standard Lift Linkage – Stroke
20.3in
Hydraulic Cycle Time – Raise, Ground Level to Maximum Lift
5.5s
Hydraulic Cycle Time – Dump (at Maximum Lift Height)
1.5s
Hydraulic Cycle Time – Float Down, Maximum Lift to Ground Level
2.6s
Hydraulic Cycle Time – Total Cycle Time
9.6s
Note
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Fuel Tank
51.5gal (US)
Cooling System
7.9gal (US)
Engine Crankcase
5.3gal (US)
Transmission – Gear Box
2.2gal (US)
Front Axles
6.9gal (US)
Rear Axles
6.6gal (US)
Hydraulic System – Including Tank
42.3gal (US)
Hydraulic Tank
23.8gal (US)
Diesel Exhaust Fluid (DEF) Tank
5gal (US)
Note
DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019.
Forward and Reverse – Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse – Range 2
8mile/h
Forward and Reverse – Range 3
17mile/h
Forward and Reverse – Range 4
25mile/h
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Standard Size
20.5 R25, radial (L-3)
Other Choices Include
20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 LEVEL II
Front
Fixed; Locking differential (standard)
Rear
Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons).
Operator Sound Pressure (ISO 6396:2008)
68dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)
101dB(A)
Note (1)
European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.
Recyclability
95%
Height – Ground to Cab**
10.92ft
Height – Ground to Beacon**
12.17ft
Height – Ground to Axle Center**
2.25ft
Height – Ground Clearance**
1.33ft
Length – Overall*
26.5ft
Length – Rear Axle to Bumper
6.42ft
Length – Hitch to Front Axle
4.92ft
Length – Wheel Base
9.83ft
Clearance – Bucket at 45°*
11.08ft
Clearance – Load over Height**
11.67ft
Clearance – Level Bucket**
13.33ft
Height – Bucket Pin**
14.42ft
Height – Overall**
18.25ft
Reach – Bucket at 45°*
4.17ft
Carry Height – Bucket Pin
1.92ft
Dig Depth**
5.3in
Width – Bucket
8.33ft
Width – Tread Center
6.33ft
Turning Radius – Over Bucket
20.42ft
Width – Over Tires
8.33ft
Turning Radius – Outside of Tires
17.75ft
Turning Radius – Inside of Tires
9.33ft
Rack Angle at Full Lift
51°
Dump Angle at Full Lift
49°
Rack Angle at Carry
47°
Departure Angle
33°
Articulation Angle
40°
Operating Weight
28787lb
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a machine configured with 1.9 m³ (2.5 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.
Steering Cylinder – Bore Diameter
2.8in
Steering Cylinder – Rod Diameter
1.6in
Steering Cylinder – Stroke
17.2in
Maximum Flow – Steering Pump
34gal/min
Maximum Working Pressure – Steering Pump
3500psi
Steering Cycle Times (Full Left to Full Right) – Minimum RPM: Pump Flow Limited
2.8s
Steering Cycle Times (Full Left to Full Right) – Maximum RPM: 90 RPM Steering Wheel Speed
2.4s
Height – Ground to Cab**
10.92ft
Height – Ground to Beacon**
12.17ft
Height – Ground to Axle Center**
2.25ft
Height – Ground Clearance**
1.33ft
Length – Overall*
24.25ft
Length – Rear Axle to Bumper
6.42ft
Length – Hitch to Front Axle
4.92ft
Length – Wheel Base
9.83ft
Clearance – Bucket at 45°*
9.42ft
Clearance – Load over Height**
11ft
Clearance – Level Bucket**
11.75ft
Height – Bucket Pin**
12.83ft
Height – Overall**
16.67ft
Reach – Bucket at 45°*
3.08ft
Carry Height – Bucket Pin
1.25ft
Dig Depth**
3.9in
Width – Bucket
8.33ft
Width – Tread Center
6.33ft
Turning Radius – Over Bucket
19.33ft
Width – Over Tires
8.33ft
Turning Radius – Outside of Tires
17.75ft
Turning Radius – Inside of Tires
9.33ft
Rack Angle at Full Lift
53°
Dump Angle at Full Lift
50°
Rack Angle at Carry
41°
Departure Angle
33°
Articulation Angle
40°
Operating Weight
27972lb
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a machine configured with 1.9 m³ (2.5 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.
  • NOTE: Not all features are available in all regions.
  • Operator Environment
    • 75 mm (3 in) retractable seatbelt
    • Automatic temperature control
    • Cab, enclosed ROPS/FOPS pressurized and sound suppressed
    • Push to Start
    • 8 Inch Touch Screen
    • Jog Dial with screen control
    • Programmable Joystick
    • Cup holders
    • External mirrors with lower parabolic
    • Ground level cab door release
    • Hydraulic control lockout
    • Interior cab lighting, door
    • Lunch box storage
    • Operator Not Present system
    • Radio ready speakers
    • Rear window defrost, electric
    • Seat mounted electronic implement controls, adjustable
    • Sliding glass on side window
    • Column mounted multi function control lights, wipers, turn signal
    • Suspension seat, fabric
    • Tilt steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front
    • Wet arm wiper washer, rear
    • Mounting Provision
    • Digital hour meter, odometer and tachometer
    • Digital ground speedometer and direction indicator
    • Engine coolant temperature gauge
    • Fuel and diesel exhaust fluid levels
    • Hydraulic oil temperature gauge
  • Power Train
    • Cat C7.1 engine
    • Auto idle shut down feature
    • Auto Engine RPM
    • Tier 4 Final/EU Stage V compliant
    • Turbocharged and aftercooled
    • Filtered crankcase breather
    • Diesel particulate filter
    • Selective catalyst reduction
    • Dry type air cleaner
    • Coolant protection to –34 °C (–29 °F)
    • Fuel priming pump, automatic
    • Fuel water separator
    • Differential lock in front axle
    • Axle seal guards
    • Enclosed wet disc full hydraulic brakes
    • Parking brake, electric
    • Lubed for life driveshafts
    • Hydrostatic transmission with electronic control
    • Operator modes (TC, Hystat,
    • Single Pedal and Ice)
    • Directional shift aggressiveness (fast, medium, slow)
    • Auto Wheel Torque control, adjust wheel torque
    • Creeper control, adjust ground speed
    • Single plane cooling package, wide 6 fins per inch density
    • Hydraulically driven demand cooling fan
    • Scheduled Oil Sampling (S·O·SSM) port, engine, coolant, transmission
  • Hydraulics
    • Automatic lift and bucket kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow)
    • Hydraulic response setting (fast, medium, slow)
    • Hydraulic diagnostic connectors and
    • S·O·S ports
    • Hydraulic sight gauge, visible
    • Load sensing hydraulics and steering
    • Seat mounted hydraulic joystick controls
    • Cat Payload 250 hours of Demo
  • Electrical
    • Alternator, 115-amp, heavy duty
    • 12V power supply in cab (2)
    • Batteries, 1,000 CCA (2) 24-volt system, disconnect switch
    • Back up alarm
    • Emergency shutdown switch
    • LED rear stop and turn lights
    • Heavy duty gear reduction starter
    • Product Link Elite
    • Remote jump start post
    • Resettable main and critical function breakers
    • Roading lights front and rear
  • Other
    • Large-access enclosure doors with adjustable close/open force
    • Parallel lift loader linkage
    • Recovery hitch with pin
    • Remote mounted lubrication points
    • Lockable compartments
    • 1000-hour Service Intervals (after initial 500)
  • NOTE: Not all features are available in all regions.
  • Operator Environment
    • Joystick steering – 25 mph (40 kph) capable
    • Radio packages
    • Telescoping Steering Column
    • Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
    • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Rear Object Detection
    • Multi View Camera
    • Front View Camera, roof mounted
    • Heated external Mirrors (2)
    • Electrically adjustable and heated external mirrors (2)
    • Internal Mirrors (2)
    • Sunscreen, front and rear
    • Windshield Washing Platform
    • Powered precleaned for cab air
    • Cab guarding
  • Power Train
    • Differential, limited slip, rear
    • Powertrain Guarding
    • Tire Pressure Monitoring (TPM)
    • Range of Tire Options
    • Fenders (extended cover and full coverage)
  • Hydraulics
    • Auxiliary flow, third and fourth function
    • Connect Under Pressure Disconnects
    • Ride Control System, adjustable via display
    • Autolube, integrated in display
    • Biodegradable Oil
    • Debris packages (low, medium, high)
  • Electrical
    • Cold start package
    • Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Beacon light, strobe
    • Light Guarding
  • Other Optional Equipment
    • Linkage, high lift
    • Coupler, (Fusion and ISO 23727:2009)
    • Aggregate Counterweight
    • Cat Payload Printer
    • Cylinder Guarding
    • Range of Work Tool Attachments

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here