Exterior View
Power Range

814-1015 mhp, 803-1001 bhp, 599-747 bkW

Speed Range

2100-2300 rpm

Emissions

EPA Tier 3, IMO II, EU Stage IIIA

Cat C18 ACERT High Performance Propulsion Engine (Tier 3)

ABOUT THE cat C18

The C18 ACERT marine propulsion engine has high performance commercial application ratings of 814-1015 mhp (803-1001 bhp) at 2100-2300 rpm that meet U.S. EPA Tier 3, IMO II, and EU Stage IIIA emissions regulations. In addition to meeting the stricter EPA Tier 3 emissions, this engine now offers a fresh water aftercooled option for the commercial propulsion and auxiliary engines and genset packages. From fishing to offshore and everything in between, you can be confident that we have the solution to fit your needs.

Add the CAT C18 ACERT HIGH PERFORMANCE PROPULSION ENGINE TIER 3 Model to the Cart
Power Range
814-1015 mhp, 803-1001 bhp, 599-747 bkW
Speed Range
2100-2300 rpm
Emissions
EPA Tier 3, IMO II, EU Stage IIIA
Aspiration
TA,TTA
Bore
5.7in
Stroke
7.2in
Displacement
1106in³
Rotation from Flywheel End
Counterclockwise
Configuration
In-line 6, 4-Stroke-Cycle Diesel
Maximum Length
76in
Minimum Length
73in
Maximum Dry Weight
4299lb
Minimum Height
47.2in
Maximum Width
47.4in
Minimum Dry Weight
4000lb
Maximum Height
51.2in
Minimum Width
44.6in
  • Air Inlet System
    • Separate circuit after-cooled (SCAC)
    • Open Crankcase Ventilation (OCV) system
    • Turbocharger, jacket water cooled
    • Turbocharger inlet, 152 mm (6 in) OD straight connection
  • Cooling System
    • Separate Circuit After-Cooling (SCAC) for both HEX and Keel cooled engines
    • Engine JW and SCAC Shell & Tube Heat Exchangers for HEX cooled engines
    • SCAC pump, gear driven, for HEX cooled engines only
    • Jacket water pump, gear driven
    • Sea water pump, bronze impeller, gear driven
    • SCAC and JW shunt tanks for maintaining proper pump inlet pressures
  • Exhaust System
    • Water-cooled exhaust manifold & turbocharger
    • 152 mm (6 in) round flanged outlet
  • Flywheels & Flywheel Housings
    • Flywheel Housing, SAE No. 0
    • Flywheel, 18 inch, 136 teeth
    • SAE standard rotation
    • SAE No. 1, Flywheel: 14 inch, 113 teeth
  • Fuel System
    • Front service simplex fuel system
    • Fuel transfer pump, gear driven
    • Manual fuel priming pump
    • Hybrid fuel line design
  • Lube System
    • Front service simplex oil system
    • Center sump oil pan:
    • Front and top service oil filler locations
    • Front service dipstick
    • Oil pump, gear driven
  • Power Take-offs
    • Poly-V groove for alternator drive
    • NOTE: There are no standard power take-offs available
  • General
    • Front damper guard
    • Front service engine
    • Common electrical bonding point
    • Engine does not ship with zinc components
    • Engine is certified to D2/E2 emissions cycles
    • CERTIFIED TO 2013 EPA TIER 3 AND IMO II MARINE COMMERCIAL PROPULSION (E3 CYCLE) EMISSION STANDARDS
    • CERTIFIED TO EU STAGE IIIA AND CCNR STAGE II (E3 CYCLE) EMISSIONS STANDARDS.
    • NOTE: Ratings listed below can also be used in Recreational / Pleasure Craft applications.
  • Control System
    • Programmable low idle
    • WOSR (Wide Operating Speed Range) available for EPA Tier 3 – B and C Ratings
    • Adjustable High Idle (TEL) – EPA Tier 3 WOSR Ratings Only
    • Electronic diagnostics and fault logging
    • Engine and transmission monitoring (speed, temperature, pressure)
    • Electronic fuel/air ratio contro
    • Engine Protection Mode for extended ambient conditions – EPA Tier 3 Ratings Only
    • Torque Limiting functionality for WOSR ratings only
    • 70-pin customer connector
    • Three types of throttle inputs (primary/ secondary PWM, 0-5V, 4-20mA +/-
  • Exhaust System
    • Dry Elbows
    • Water-Cooled Elbows
    • Flexible Fitting
    • Flange
    • Muffler
    • Muffler Spark Arresting
  • Charging System
    • Battery Chargers
    • Charging Alternators
    • Alternator Mounting Group
    • Ammeter
  • Control System
    • MECP I
    • CATERPILLAR ALARM AND PROTECTION
  • Cooling System
    • AUX EXPANSION TANK FLANGE KIT
  • Fuel System
    • Duplex Fuel Filters
    • Flexible Fuel Lines
    • Fuel Cooler
    • Primary Fuel Filters
  • Instrumentation
    • Instrument Panels
    • OEM Wiring Harness
    • Engine to Engine Harness
    • Gauges
    • Transmission Sensors
    • Oil Level Sensor
  • Lube System
    • Duplex Oil Filters
    • Transmission Oil Cooler
    • Sump Pump
  • Mounting System
    • Vibration Isolators
    • Front Support
    • Rear Support
  • Power Take-offs
    • NOTE: PTO OPTIONS REQUIRE TORSIONAL VIBRATION ANALYSIS
    • Crankshaft Pulleys
    • Front Stub Shaft
    • Hydraulic Pump Drive Adapter
    • Front Enclosed Clutch
  • Protection System
    • Marine Classification Society and SOLAS
    • Marine Classification Society and Fire Resistance
  • Starting System
    • STARTING SYSTEM Electric Starting Motors – Single 24 Volt
    • Air Starting Motor
    • Air Start Accessories
    • Starting Aids – JW Heaters
    • Battery Sets – 24 Volt – Dry

Coming Soon





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here