Exterior View
Continuous Rating

1660 ekW

Fuel Type

Natural Gas

Maximum Electrical Efficiency

37.70%

G3516C Gas Generator Set

ABOUT THE g3516c

G3516C Generator Set

This g3516c model is not yet in your cart.
Click on the add to cart button to build an equipment list.
Add the G3516C Model to the Cart
Continuous Rating
1660 ekW
Fuel Type
Natural Gas
Maximum Electrical Efficiency
37.70%
Maximum Standby Rating
1500
Frequency
50 / 60 Hz
RPM
1500/1800
Engine Model
G3516C
Displacement
4210in³
Aspiration
TA
Bore
6.7in
Stroke
7.5in
Length
219in
Width
72in
Height
92in
Dry Weight – Genset
31226lb
  • Air Inlet
    • Two-element single-stage air cleaner with enclosure and service indicator
  • Control Panels
    • EMCP 4.3
  • Cooling
    • Jacket water and SCAC driven pumps and bypass lines
    • 2nd Stage SCAC-Cat Flange
    • Engine driven water pumps for jacket water and aftercooler
    • Jacket water and SCAC thermostats
    • ANSI/DN customer flange connections for JW inlet and outlet
    • Cat flanges on SCAC circuit
  • Exhaust
    • Integrated Sensing Module (ISM)
    • Cat-flanged face outlet on turbocharger
    • Provides exhaust port temperatures and stack temperature to customer supplied screen via CCM
    • Dry exhaust manifolds, insulated and shielded
  • Fuel System
    • 24V ETR Gas Shutoff Valve
    • Engine installed, fuel metering valve
    • Throttle plate, 24V DC actuator, controlled by ECM
    • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
    • Fuel Filter
  • Ignition System
    • Individual Cylinder Detonation Sensitive Timing (DST)
    • Electronic Ignition System (controlled by ECM)
  • Fuel System
    • Electronic fuel metering valve
  • Generator
    • Anti-condensation space heater
    • Busbar connections
    • Class H Insulation & Class F temperature rise
    • Reactive Droop
    • Permanent Magnet Excitation
    • 3-phase brushless, salient pole
    • Caterpillar’s Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
    • SR4B
    • Winding temperature detectors
  • General
    • RH Service
    • Operation and maintenance manuals
    • Crankshaft Vibration Damper and Guard
    • Parts Book
  • Starting/charging
    • 24V starting motors
  • Air Inlet
    • Vertical, horizontal dual element air cleaner
    • Enclosure mounting brackets and piping
    • Air cleaner with precleaner
  • Control Panel
    • Local NFPA99-110 Alarm Module w/LEDs
    • Synchronizing Module
    • Remote 24V 8/16 Light Annunciator
    • Engine Failure Relay
    • PL1000E/PL1000T Communications Module
    • Custom 8-Light Alarm Module
  • Cooling
    • Inlet/Outlet connections
    • Jacket water coolant heater
    • Aftercooler air lines, aftercooler core replacement
  • Exhaust
    • Flexible Fittings
    • 14″ Flange Kit
    • 406 mm Elbow Kits
    • 406 mm flange kits
    • Mufflers (15/18/25 dBA Attenuation) and spark-arresting muffler with ANSI companion flanges
    • 16″ Spark Arresting Muffler
    • 356-406mm Flange and Exhaust Expander
    • 15/18/25 dBA Muffler Attenuation
  • Fuel System
    • 207-276kPa, 30-40 psi gas knockdown regulator
    • 14-69 kPa (2-10 psi) gas pressure regulator
    • 24VDC Gas Shutoff Valve, Gas Knockdown Regulator
    • Fuel Filter, Gas Filter
  • Generator
    • Cable access box
    • 8.7/15 kV Cross, Differential, Current Transformers (CCCT, DCT, CT)
    • Medium and high voltage generators and attachment
    • 480/4160/13200 Volt Generator Options (60 Hz)
    • Generator air filter
    • Bearing temperature detectors
    • European Bus Bars
    • 415/400/380, 3300/6600/11000 Volt Generator Options (50 Hz)
    • Annunciator Modules
    • Generator Removal
    • Low voltage extension box
  • Governing System
    • Load share module
  • General
    • Special paint order
    • Tool set
    • US AID Emblem
    • Barring group
    • Digital diagnostic tool
  • Starting/charging
    • 60A, 24V charging alternator (requires engine driven pumps)
    • Battery removal
    • 20A battery charger
    • Battery disconnect switch
    • Battery with cables and rack (shipped loose)

Coming Soon





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here