Exterior View
Exterior View
Interior View
Interior View
Net Power – SAE J1349:2011

538 hp

Operating Weight

116362 lb

Engine Model

Cat® C18 ™

988 XE Wheel Loader

ABOUT THE 988 XE

Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton.
Introduced in 1963, the 988 has been the industry leader for over 60 years, built on a legacy of reliability, performance, safety, operator comfort, serviceability, and productivity. The 988 XE brings improved sustainability and maximum efficiency to this machine platform.

Add the 988 XE Model to the Cart
Net Power – SAE J1349:2011
538hp
Engine Model
Cat® C18 ™
Engine Power – ISO 14396:2002
580hp
Gross Power – SAE J1995:2014
588hp
Rated Speed
1,700 rpm
Peak Power Speed
1,500 rpm
Emissions
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
Bore
5.7in
Stroke
7.2in
Displacement
1105in³
Peak Torque – 1,200 rpm – SAE J1995
2230ft·lbf
Torque Rise
58%
Operating Weight
116362lb
Operating Weight – Standard
116362lb
Operating Weight – High Lift
119618lb
Rated Payload – Standard (Quarry Face)
12.5ton (US)
Rated Payload – Loose Material (Standard)
16ton (US)
Bucket Capacity Range
4.7-13 m3 (6.2-17 yd3)
Transmission Type
Cat switched reluctance electric drive
Forward 1 (virtual)
4.3mile/h
Forward 2 (virtual)
7mile/h
Forward 3 (virtual)
13.8mile/h
Forward 4 (virtual)
20mile/h
Reverse 1 (virtual)
4.3mile/h
Reverse 2 (virtual)
7mile/h
Reverse 3 (virtual)
17.5mile/h
Lift/Tilt System – Circuit
EH-Positive Flow Control, Flow Sharing
Lift/Tilt System – Pump
Variable displacement piston
Maximum Flow at 1,400-1,600 rpm
153gal/min
Relief Valve Setting – Lift/Tilt
4757psi
Lift Cylinder – Bore
8.7in
Lift Cylinder – Stroke
41.3in
Tilt Cylinder – Bore
8.7in
Tilt Cylinder – Stroke
27in
Rack Back
4.5s
Raise
8s
Dump
2.2s
Lower Float Down
3.5s
Total Hydraulic Cycle Time
18.2s
Steering System – Circuit
Pilot, load sensing
Steering System – Pump
Piston, variable displacement
Maximum Flow at 1,400-1,600 rpm
71.3gal/min
Steering Cut Off Pressure
4351psi
Total Steering Angle
86°
Steering Cycle Times – High Idle
3.4s
Steering Cycle Times – Low Idle
5.6s
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Front
Fixed
Rear
Trunnion
Oscillation Angle
13°
Brakes
ISO 3450:2011
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Fuel Tank
147gal (US)
Cooling System – Jacket Water
30gal (US)
Cooling Systems – Power Train
8gal (US)
Engine Crankcase
16gal (US)
Diesel Exhaust Fluid Tank
8.7gal (US)
Transmission
16gal (US)
Differential – Final Drives – Front
49gal (US)
Differential – Final Drives – Rear
49gal (US)
Hydraulic System – Implement/Steering
126gal (US)
Note
All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati
Operator Sound Pressure Level (ISO 6396:2008)
72dB(A)
Machine Sound Power Level (ISO 6395:2008)
109dB(A)
Operator Sound Pressure Level (ISO 6396:2008)
72dB(A)
Machine Sound Power Level (ISO 6395:2008)
110dB(A)
Ground to Top of ROPS
13.8ft
Ground to Top of Exhaust Stacks
14.8ft
Ground to Top of Hood
10.9ft
Ground to Bumper Clearance
3.1ft
Rear Axle – Centerline to Bumper
10.5ft
Front Axle Centerline to Bucket Tip
14ft
Wheel Base
14.9ft
Maximum Overall Length
39.3ft
Ground to Lower Hitch Clearance
1.9ft
Ground to Center of Axles
3.2ft
Clearance at Maximum Lift
11.9ft
B-Pin Height – Maximum Lift
18ft
Maximum Overall Height – Bucket Raised
24.5ft
Reach – Maximum Lift
6.5ft
Note
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Ground to Top of ROPS
13.8ft
Ground to Top of Exhaust Stacks
14.8ft
Ground to Top of Hood
10.9ft
Ground to Bumper Clearance
3.1ft
Rear Axle – Centerline to Bumper
10.5ft
Front Axle Centerline to Bucket Tip
15.3ft
Wheel Base
14.9ft
Maximum Overall Length
40.7ft
Ground to Lower Hitch Clearance
1.9ft
Ground to Center of Axles
3.2ft
Clearance at Maximum Lift
13.3ft
B-Pin Height – Maximum Lift
19.3ft
Maximum Overall Height – Bucket Raised
25.8ft
Reach – Maximum Lift
6.8ft
Note
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Ground to Top of ROPS
13.8ft
Ground to Top of Exhaust Stacks
13.8ft
Ground to Top of Hood
10.9ft
Ground to Bumper Clearance
3.1ft
Rear Axle – Centerline to Bumper
10.5ft
Front Axle Centerline to Fork Tip
16.5ft
Wheel Base
14.9ft
Maximum Overall Length
41.9ft
Ground to Lower Hitch Clearance
1.9ft
Ground to Center of Front Axle
3.2ft
Fork Height with Level Arms
8.1ft
Fork Top Clamp Opening
13.1ft
Fork Height at Maximum Lift
17.2ft
Hinge Pin Height at Maximum Lift
16.1ft
Dump Angle at Maximum Lift
-39.4°
Bucket Capacities
4.7-13 m3 (6.2-17 yd3)
Recyclability
96%
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Electrical
    • Alarm, back-up
    • Alternator, single 150 amp
    • Batteries, dry
    • Converter, 10/15 amp, 24V to 12V
    • Lighting system (LED, work lights, access and service platform lighting)
    • Starting and charging system, 24V
    • Jump start receptacle
    • Starter lockout in bumper
    • Transmission lockout in bumper
    • Hazardous voltage lamp
  • Operator Environment
    • Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
    • Air conditioner
    • Cat Vision, rear vision camera system
    • Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12‑volt 5-amp) and power port
    • Controls, lift and tilt function
    • Heater, defroster
    • Horn, electric
    • Instrumentation, gauges
      – Coolant temperature
      – Engine hour meter
      – Hydraulic oil temperature
      – Power train oil temperature
    • Light, cab, dome
    • Lunchbox, beverage holders
    • CB radio-ready
    • Mirrors, rearview (externally mounted)
    • Rimpull Control System
    • Seat, Deluxe
    • Seat belt minder
    • Seat belt, retractable, 76 mm (3 in) wide
    • STIC Control System
    • UV glass
    • Virtual gear indicator
    • Vital Information Management System (VIMS) with Graphical Information Display: External Data Port, Customizable Operator Profiles, Cycle Timer, Integrated Payload Control System
    • Wet-Arm wipers/washers (front and rear)
      – Intermittent front and rear wipers
    • Lights, directional
  • Power Train
    • Brakes, oil-cooled, multi-disc, service/secondary
    • Case drain screens
    • Electro hydraulic parking brake
    • Engine, C18 MEUI diesel, turbocharged/aftercooled
    • Ground level engine shutoff
    • Turbine precleaner, engine air intake
    • Radiator, Aluminum Modular Radiator (AMR)
    • Starting aid, ether, automatic
    • Throttle lock, electronic
    • Manual switch and automatic fuel priming
    • Cat Production Measurement ready
    • Cat switched reluctance (SR) generator/pump drive
    • Cat switched reluctance (SR) drive motor
    • Cat Integrated Powered Electronics
    • Automatic retarding controls
  • Additional Equipment
    • Automatic bucket lift kickout/positioner
    • Base machine price includes a rim allowance
    • Hydraulically driven demand fan
    • Couplings, Cat O-ring face seals
    • Doors, service access (locking)
    • Ecology drains for engine, radiator, hydraulic tank
    • Fuel tank, 555 L (147 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT
    • Hydraulic, steering and brake filtration/screening system
    • Cat Clean Emission Module
    • Oil sampling valves
    • Premixed 50 percent concentration of extended life coolant with freeze protection to –34° C (–29° F)
    • Rear access to cab and service platform
    • Steering, load sensing
    • Toe kicks
    • Vandalism protection caplocks
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • –50° C (–58° F) antifreeze
    • Engine oil change system, high speed, Wiggins
    • Engine block heater 120V or 240V
    • High ambient cooling – software
    • Cat Production Measurement
    • Crankcase guard
    • Engine brake, software enabled attachment (SEA)
  • Other Optional Configurations
    • Load and Carry
    • Millyard
    • Aggregate Handler
  • Operator Environment
    • Cab precleaner
    • Cat Detect, object detection system
    • Cat Production Measurement
    • Radio, AM/FM/CD/MP3 Bluetooth® with Satellite SiriusXM
    • LED warning strobe
    • Window pull down visor
    • Handrail mounted mirrors
  • Additional Equipment
    • Front and rear roading fenders
    • Fast fill fuel system (Shaw-Aero)
    • Cold Weather Package: Additional Starter and 2 Batteries, Engine Block Heater 120V or 240V, Heated Fuel Lines
    • Engine Compartment Lights
    • Autolube with Auto shutoff
    • High Performance LED Lighting
    • Wheel Chocks
    • Operator Coaching
    • Tire Pressure Monitoring System
    • Autodig, Tire Slip Prevention, Auto Set Tires, and Lift Stall Prevention
    • Additional Counterweight

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here