Find your Louisiana Cat
(866) 843-7440
Contact Us
Exterior View
Interior View

910 Compact Wheel Loader

The Cat® 910 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Request a Quote View rental options Apply for credit
            
Maximum Gross Power
110hp
Rated Net Power – Rated Engine Speed
2200r/min
Maximum Gross Power – Rated Engine Speed
1800r/min
Maximum Gross Power – ISO 14396 (metric)
112hp
Rated Net Power – SAE J1349
99hp
Rated Net Power – ISO 9249
98hp
Maximum Gross Torque – SAE J1995
335ft·lbf
Maximum Gross Torque – ISO 14396
332ft·lbf
Maximum Net Torque – SAE J1349
329ft·lbf
Maximum Net Torque – ISO 9249
327ft·lbf
Displacement
220in³
Bore
3.85in
Stroke
4.72in
Engine Model
Cat C3.6
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power – ISO 14396
110hp
Operating Weight
18102lb
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities – General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities – Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
Recyclability
95%
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Cooling System
5.7gal (US)
Fuel Tank
43.6gal (US)
Hydraulic System – Including Tank
25.9gal (US)
Hydraulic Tank
14.5gal (US)
Transmission
0.8gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles – Front Center Differential
2gal (US)
Axles – Rear Center Differential
2gal (US)
Engine Crankcase
2.6gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.8gal (US)
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse – Speed Range 3
25mile/h
Forward and Reverse – Speed Range 2*
12.5mile/h
Forward and Reverse – Speed Range 1*
6.3mile/h
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Size
15.5 R25 L2 XTLA
Other Choices Include
17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (Standard)
Maximum Working Pressure – Steering Pump
2683psi
Steering Articulation Angle – Each Direction
40°
Steering Cycle Times – Full Left to Full Right – At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2s
Maximum Flow – Steering Pump
17gal/min
Number of Steering Wheel Turns – Full Left to Full Right or Full Right to Full Left
3.75turns
Hydraulic Cycle Time – Dump, at Maximum Reach
1.4s
Hydraulic Cycle Time – Total Cycle Time
12.5s
Maximum Working Pressure – Implement Pump
3408psi
Relief Pressure – Tilt Cylinder
4931psi
Hydraulic Cycle Time – Rackback
2.2s
Relief Pressure – Tilt Cylinder – 3rd Function Maximum Working Pressure
3046psi
Hydraulic Cycle Time – Raise, Ground Level to Maximum Lift
5.2s
Maximum Flow – Implement Pump
32gal/min
Relief Pressure – Tilt Cylinder – 4th Function Maximum Working Pressure
3046psi
Maximum Flow – Implement Pump – 4th Function, Maximum Flow
24gal/min
Maximum Flow – Implement Pump – 3rd Function, Maximum Flow
24gal/min
Hydraulic Cycle Time – Float Down, Maximum Lift to Ground Level
3.7s

4203 mm (165 in) Material Handling Arms – Loader

3941 mm (155 in) Material Handling Arms – Loader

1550 mm (61 in) Pallet Fork Carriage

1550 mm (61 in) Pallet Fork Carriage

1524 mm (60 in) Pallet Fork Carriage

2134 mm (84 in) Log & Lumber Fork Carriage

1.9 m3 (2.5 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.9 m3 (2.5 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.7 m3 (2.2 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.7 m3 (2.2 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.6 m3 (2.1 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.6 m3 (2.1 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.6 m3 (2.1 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.6 m3 (2.1 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.5 m3 (2.0 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.5 m3 (2.0 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Teeth

1.5 m3 (2.0 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.4 m3 (1.8 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.4 m3 (1.8 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.4 m3 (1.8 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.3 m3 (1.7 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Teeth

1.3 m3 (1.7 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.3 m3 (1.7 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.2 m3 (1.6 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.2 m3 (1.6 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.9 m3 (2.5 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge

1.7 m3 (2.2 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge

1.8 m3 (2.4 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Weld-On Teeth

1.6 m3 (2.1 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Weld-On Teeth

1.6 m3 (2.1 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge

1.5 m3 (2.0 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Weld-On Teeth

1.34 m3 (1.75 yd3) IT Coupler Multi-Purpose Bucket With Bolt-On Cutting Edge

1.34 m3 (1.75 yd3) IT Coupler Multi-Purpose Bucket With Bolt-On Cutting Edge

BA25 Manual Angle Broom

BP25 Pickup Broom

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN




STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

            
Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here