Find your Louisiana Cat
(866) 843-7440
Contact Us
Exterior View
Interior View
Engine Model

Cat® C18

Engine Power – Net SAE J1349/ISO 9249

452 hp

Operating Weight

110225 lb

D9 Dozer

ABOUT THE d9

The Cat® D9 Dozer is a versatile machine designed to be used in a variety of applications, such as ripping overburden, production dozing, stockpiling, winching, site maintenance, fleet support and reclamation. It can be equipped with a number of blade options to meet site-specific needs. A highly reliable and fully integrated Cat machine, the D9’s components work together to ensure top performance, high availability and long life. Features like the new stator clutch torque converter boost efficiency and reduce fuel usage, and a number of onboard technology solutions further increase efficiency and performance. These improvements — and more — make the D9 a dozer that delivers a lower overall cost per unit of material moved.

            
Add the D9 Model to the Cart
Request a Quote View rental options Apply for credit
Engine Model
Cat® C18
Engine Power – Net SAE J1349/ISO 9249
452hp
Bore
5.7in³
Stroke
7.2in
Displacement
1106in³
Engine Power – Gross SAE J1995
487hp
Engine Power – ISO 14396
479hp
Emissions
U.S. EPA Tier 2 or Tier 3 equivalent
Note (1)
All engine ratings apply at 1,750 rpm.
Note (2)
No derating required up to 4267 m (14,000 ft) altitude.
Operating Weight
110225lb
Shipping Weight
84373lb
Note (1)
D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
Note (2)
D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
Shoe Type
Extreme Service
Width – Shoe
24in
Shoes/Side
43
Grouser Height
3.3in
Pitch
9.4in
Ground Clearance
18.1in
Track Gauge
88.6in
Length – Track on Ground
136.6in
Ground Contact Area
45.6ft²
Track Rollers/Side
8
Number of Carrier Rollers
1 per side (optional)
ROPS
Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
Sound
The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
Sound (1)
The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
Sound (2)
Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
Steering Type
Differential
Brake Type
Spring Applied Wet Disc
Brake Diameter
15.5in
Brake Count
8
Engine Model
Cat® C18
Bore
5.7in³
Stroke
7.2in³
Displacement
1106in³
Engine Power – Gross SAE J1995
477hp
Engine Power – ISO 14396
468hp
Engine Power – Net SAE J1349/ISO 9249
440hp
Emissions
U.S. EPA Tier 4 / EU Stage V
Note (1)
All Engine ratings apply at 1,750 rpm.
Note (2)
No derating required up to 2499 m (8,200 ft).
Fuel Tank (Splash Fill)
254gal (US)
DEF Tank (Tier 4 only)
9.5gal (US)
Fuel Tank (Fast Fill)
248gal (US)
Cooling System
21gal (US)
Engine Crankcase*
10gal (US)
Powertrain
40gal (US)
Final Drives (each)
4gal (US)
Roller Frames (each)
12gal (US)
Pivot Shaft Oil
8gal (US)
Hydraulic System Tank
24gal (US)
Note
*With oil filters.
Note 2
Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
Note 3
All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
Note 4
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Pump Type
Piston-type geared to flywheel
Pump Output – Steering
96gal/min
Fan Pump
21gal/min
Tilt Cylinder Flow – Rod End Flow
53gal/min
Tilt Cylinder Flow – Head End Flow
53gal/min
Lift Cylinder Relief Valve Setting
3800lbf/in
Tilt Cylinder Relief Valve Setting
2799psi
Ripper – Lift – Relief Valve Setting
3800psi
Ripper – Pitch – Relief Valve Setting
3800psi
Steering System – Pressure
5874psi
Tank Capacity
24gal/min
Note (1)
Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
Note (2)
Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
Note (3)
Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
1.0 Forward
2.2mile/h
2.0 Forward
3.9mile/h
3.0 Forward
6.8mile/h
1.0 Reverse
2.7mile/h
2.0 Reverse
4.8mile/h
3.0 Reverse
8.4mile/h
Type
Planetary powershift
Blade Capacity (SAE J1265)
17.8yd³
Blade Width (over end bits)
171.3in
Blade Height
76.1in
Maximum Digging Depth
23.9in
Ground Clearance at Full Lift
56in
Maximum Tilt
37in
Blade Weight
10587lb
Total Operating Weight* (with blade and single-shank ripper)
110205lb
Note
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Blade Capacity (SAE J1265)
21.7yd³
Blade Width (over end bits)
184.3in
Blade Height
76.1in
Maximum Digging Depth
23.9in
Ground Clearance at Full Lift
56in
Maximum Tilt
39.9in
Blade Weight
12016lb
Total Operating Weight* (with blade and single-shank ripper)
111362lb
Note
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Maximum penetration force * (shank vertical)
35520lbf
Maximum penetration depth (standard tip)
48.5in
Pryout Force
74637lbf
Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole
34.7in
Number of Pockets
1
Weight
10701lb
Total Operating Weight* (with SU Blade and noted ripper)
110205lb
Note
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Maximum penetration force * (shank vertical)
38667lbf
Maximum penetration depth (standard tip)
68in
Pryout Force
74412lbf
Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole
32.2in
Number of Pockets
1
Weight
10981lb
Total Operating Weight* (with SU Blade and noted ripper)
110485lb
Note
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Maximum Penetration Force – Shank Vertical
34621lbf
Maximum Penetration – Standard Tip
31.4in
Pry-Out Force – Multi-Shank Ripper with One Tooth
81156lbf
Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole
34.6in
Number of Pockets
3
Weight
12136lb
Total Operating Weight* – With SU-Blade and Ripper
111739lb
Note
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Ground Clearance*
18.1in
Track Gauge
88.6in
Width – Without Trunnions – Standard Shoe
113in
Width – Over Trunnions
130.3in
Height – FOPS Cab*
150.4in
Height – Top of Stack*
152.6in
Height – ROPS/Canopy*
157.5in
Drawbar Height (Center of Clevis)*
30in
Length – Track on Ground
136.6in
Overall Length – Basic Tractor
193.3in
Length – Basic Tractor – With Drawbar
206.4in
Length – Basic Tractor – With Winch
218.3in
Length – With SU-Blade**
259.9in
Length – With U-Blade
274.3in
Length – With Single-Shank Ripper
257in
Length – With Multi-Shank Ripper
257.4in
Overall Length – SU-Blade/SS Ripper
323.6in
Note (1)
*Includes grouser height for total dimensions on hard surfaces.
Winch Model
PA 140VS
Weight*
3950lb
Oil Capacity
4gal (US)
Drum Width
12.6in
Wire Cable Diameter – Recommended
1.13in
Wire Cable Diameter – Optional
1.25ft
Maximum Drum Capacity – Recommended Cable Length
257in
Maximum Drum Capacity – Optional Cable Length
204ft
Wire Cable Ferrule Size – Outside Diameter
2.4in
Wire Cable Ferrule Size – Length
2.8in
Note
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note (2)
Variable speed, hydraulically driven, dual braking system, three-roller fairlead.
  • Operator Environment
    • ROPS/FOPS, Sound-Suppressed Cab
    • High-Definition Primary Touchscreen Display
    • Visibility – Rearview Mirrors
    • Air Conditioner and Heater with Automatic Climate Control
    • Seatbelt, 76 mm (3 in) Retractable with Switch
    • Seat — Cloth with Air Suspension
    • Window Wipers with Wash — Low, High, Intermittent
    • Differential Steering — Power Turn
    • Entertainment Radio Ready (12V Power, Harness, Speakers)
    • Cab Glass — Single-Pane Tinted Safety
    • Cab Door — Right-Hand Swing
    • Access/Egress Lighting with Shutdown Timer
    • “Operator Not Present” Detection
    • Armrest — Adjustable
    • Interior LED Courtesy Lights
    • Interior Backlighting — Dimmable
    • Air Conditioning Condenser — Cab Mounted (Standard only on Tier 4 engine arrangements. Optional on Tier 2/3 versions. Tier 2/3 versions have underhood A/C condenser standard.)
    • Decelerator Pedal
    • Controls — Blade — Electronic
    • Controls — Ripper — Electronic
    • Park Brake — Electronic
    • Engine Speed Control Dial
    • Cab Access — Blade Pusharm Steps and Grab Handle
    • Fender Platform Guardrails
    • Site Communication Radio Mount
    • Four Fluids (Engine Oil, Coolant, Power Train, Fuel)
    • Continuous Fluid Level Monitoring — Four Fluids (Engine Oil, Power Train, Coolant, Fuel)
    • Slope and Side Slope Monitor
  • Technology
    • VIMS™
    • Automated Blade Assist (ABA) — When Equipped with Dual Tilt
    • Cat Product Link Elite (Cellular) (Where Allowed by Local Regulations)
  • Power Train
    • Aftercooler, air-to-air
    • Air filter, with precleaner
    • Aluminum bar plate radiator, 6 fpi
    • C18 Tier 4 Final and Stage IV: – 24-volt electric start – Clean Emissions Module
    • Coolant, extended life
    • Shift management: – Advanced Productivity Electronic Control System (APECS) – Enhanced AutoShift (EAS)
    • Engine idle shutdown timer
    • Ether starting aid, automatic
    • Fast fuel system
    • Fuel priming pump, key-on, electric
    • High speed oil change system, engine and power train
    • Muffler
    • Parking brake, electronic
    • Prescreener
    • Separator, water/fuel
    • Three planet, double-reduction planetary final drives
    • Torque converter
    • Transmission, electronic control (ECPC), (3F/3R speeds)
  • Fluids
    • Coolant — Extended Life, Standard (— 37° C / — 25° F)
  • Undercarriage
    • Suspension-Type Undercarriage
    • Track Guide
    • Two-Piece Master Link
    • Lifetime-Lubricated Rollers and Idlers
    • Hydraulic Track Adjusters
    • Equalizer Bar — Greased End Pin Bearings
  • Hydraulics
    • Electronically Controlled, Load-Sensing Dozer Lift and Tilt
    • Electronically Controlled, Load-Sensing Ripper Lift and Pitch
    • Electronically Enabled Blade, Quick Drop
  • Electrical
    • Alternator — 150-Amp
    • Batteries — 2 x 4, 200-Amp Hour, 12V
    • 12V, 15-Amp Converter
    • Battery Isolation
    • Backup Alarm
    • Lights, Engine Compartment
    • Lights — Halogen — 8 Positions
  • Service And Maintenance
    • Ecology Fluid Drains — All Compartments
    • Hinged Bottom Guards
    • High-Speed Oil Change — Engine and Transmission
    • SOS℠ Fluid Sampling Ports
    • Diagnostic Connector
    • CapSureTM Hammerless Ripper Tip and Shank Protectors
    • Anchorage Points (10)
  • Operator Environment
    • Visibility – Camera – Ripper Tip View
    • Visibility — Dual Camera
    • Visibility — Four Cameras — 360-Degree View
    • Seat — Heated, Cooled, Adjustable Lumbar and Bolsters
    • Entertainment Radio — AM/FM, Aux Input and Bluetooth®
    • Cab Glass — Dual-Pane Laminated Impact Safety
    • Cab Glass — High-Pressure Safety (40 psi/275 kPa)
    • Window Sunscreen
    • Small Operator 5th Percentile Mounting Group
    • Cab Door — Left-Hand Swing
    • Cab Access — Powered Ladder
    • Cab Filter Powered Precleaner
  • Technology
    • AutoCarry™
    • Auto Ripper Control
    • Cat Product Link Elite Dual Mode (Cellular + Satellite)
    • Cat GRADE with 3D
  • Power Train
    • Coolant, arctic
    • Engine prelube
    • Exhaust, wrapped: – Insolated Clean Emissions Module
    • Final drives: – Cold weather – Guarded – Waste handling
    • Ground level DEF fill
    • Reversible cooling fan
  • Fluids
    • Coolant — Extended Life, Arctic (— 51° C / — 60° F)
    • High Ambient Lubrication Package
    • Arctic Lubrication Package
  • Undercarriage
    • Undercarriage Arrangement — Abrasion
    • Undercarriage Arrangement — Waste Handling
    • Undercarriage Arrangement — Cold Weather
    • Front Striker Bars
    • Rubber Idler Guards
    • Track Links — Heavy Duty XL — DuraLink
    • Track Shoe — Anti-Packing Round Hole Carrier Roller
    • Carrier Roller
    • Carrier Roller — Cold Weather
  • Hydraulics
    • Dozer Blade Dual Tilt
    • Ripper Pin Puller
    • Guarded Tilt Cylinder Lines
  • Electrical
    • 24V Electric Start, Dual Starters
    • Batteries — 4 x 200, 200-Amp Hour, 12V
    • Lights — Halogen — 12 Positions
    • Lights — LED — 14 Positions
    • Lights — High-Output LED — 14 Positions
    • Light — Warning Strobe
  • Service And Maintenance
    • Sound-Reduction Sealed Bottom Guards
    • Ground-Level Fast Fuel Fill (Standard on Tier 4)
    • Sound Enclosure
    • Cat Autolube Grease System with Ground-Level Fill and Auto Shutoff
    • Hinged Quick-Access Door on Radiator Guard
  • Rear Attachments
    • Ripper Ready
    • Winch Ready
    • Ripper — Single Shank
    • Ripper — Single-Shank Deep
    • Ripper — Multi Shank (three shank)
    • Counterweight
    • Striker Box (Waste)
    • Winch
    • Drawbar
  • Blades
    • Semi-Universal (13.6 m3/17.8 yd3)
    • Semi-Universal Abrasion (13.6 m3/17.8 yd3)
    • Universal (16.6 m3/21.7 yd3)
    • Universal Abrasion (16.6 m3/21.7 yd3)
    • Semi-Universal Push Plate (13.6 m3/17.8 yd3)
    • SU Landfill (28.2 m3/36.8 yd3)
    • Universal Landfill (38.8 m3/50.8 yd3)
    • Woodchip (46.1 m3/60.3 yd3)
    • Coal (36.8 m3/48.2 yd3)
      — Some blades only available through Cat Work Tools.
      — SU Abrasion and U Abrasion are available with black paint on back side.
  • Other
    • Fire Suppression Ready
  • Special Arrangements
    • High Debris
    • Stockpile
    • Waste Handling
    • Sound
    • Arctic

Cat® Detect with Rear Camera

Cat® Detect with Smart Camera

Cat® Detect with Surround Cameras

Cat® Seat Belt Reminder

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN




STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

            
Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here