Exterior View
Interior View
Engine Model

Cat® C3.6

Power – Net

92 hp

Operating Weight

18382 lb

D2 Dozer

ABOUT THE d2

The Cat® D2 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Add the D2 Model to the Cart
Engine Model
Cat® C3.6
Power – Net
92hp
Displacement
220in³
Net Power – 2,200 rpm – SAE J1349
92hp
Net Power – 2,200 rpm – ISO 9249/EEC 80/1269
92hp
Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Power Train
Hydrostatic
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Operating Weight
18382lb
Operating Weight
18382lb
Operating Weight – LGP
19066lb
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Drive Pumps
1
Maximum Travel Speed – Forward
5.6mile/h
Relief Valve Settings
7033psi
Maximum Travel Speed – Reverse
6.2mile/h
Track Motors
2
Pump Output
17.2gal/min
Relief Valve Settings
2988psi
Type
Parallelogram
Number of Shanks
3
Height
6.5in
Weight
1222lb
Maximum Digging Depth
13.3in
Maximum Ground Clearance Under Tip
17.6in
Overall Width
67.3in
Maximum Reach – Ground Line
30.2in
FOPS
ISO 3449:2005 Level II
ROPS
ISO 3471:2008
Length – Track on Ground – LGP
89in
Track Gauge
61in
Number of Rollers – Each Side
7
Track Gauge – LGP
68in
Ground Pressure – LGP
4.3psi
Shoe Width – Standard
18in
Shoe Width – LGP
25in
Number of Shoes – Each Side – Sealed and Lubricated Track (SALT) Undercarriage
43
Number of Shoes – Each Side – Abrasion Undercarriage
38
Ground Pressure
5.7psi
Length of Track on Ground
89in
Fuel Tank
51.5gal (US)
Crankcase – With Filter
2.8gal (US)
Final Drive – Each – LGP
2.6gal (US)
Cooling System
5gal (US)
Transmission – Hydraulic Tank
23.8gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.9gal (US)
Final Drives – Each Side
2.6gal (US)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
BLADE: Digging Depth – LGP
23.2in
BLADE: Blade Cutting Edge Angle, Adjustable – LGP
52° to 58°
BLADE: Blade Lift Height – LGP
27.9in
BLADE: Blade Width – LGP
124in
BLADE: Blade Width at Maximum Angle – LGP
113.1in
Track Gauge – LGP
67.9in
Ground Clearance – LGP
13in
BLADE: Blade Height – LGP
35.8in
Overall Length – With Blade – LGP
168.2in
BLADE: Blade Capacity (SAE) – LGP
2.42yd³
BLADE: Maximum Tilt – LGP
17.2in
BLADE: Maximum Angle (either side) – LGP
25°
BLADE: Maximum Angle (either side) – Standard
25°
Ground Clearance – Standard
13in
Overall Length – With Blade – Standard
168.5in
Note
Abrasion Undercarriage
BLADE: Blade Cutting Edge Angle, Adjustable – Standard
52° to 58°
BLADE: Maximum Tilt – Standard
15.2in
Track Gauge – Standard
61in
BLADE: Digging Depth – Standard
23.3in
BLADE: Blade Width – Standard
109.5in
BLADE: Blade Lift Height – Standard
29.3in
BLADE: Blade Capacity (SAE) – Standard
2.59yd³
BLADE: Blade Width at Maximum Angle – Standard
100.1in
Note
With Ripper Attachment (add to Length of Basic Dozer) – 1177 mm (46.3 in)
BLADE: Blade Height – Standard
39.8in
Length of Basic Dozer (without blade) – LGP
129.5in
Width of Dozer (standard shoes, no blade) – Standard
79.1in
Dozer Height – LGP
108.9in
Dozer Height – Standard
108.9in
Width of Dozer (standard shoes, no blade) – LGP
92.9in
Length of Basic Dozer (without blade) – Standard
129.5in
Maximum Line Speed – Full Drum
79ft/min
Maximum Line Speed – Bare Drum
50ft/min
Weight
1747lb
Drum Capacity – Optional Cable
195ft
Rope Diameter – Recommended
0.63in
Winch Drive
Hydraulic
Rope Diameter – Optional
0.75in
Drum Capacity – Recommended Cable
277ft
Maximum Line Pull – Full Drum
20350lb
Speed
Variable
Maximum Line Pull – Bare Drum
32150lb
Control
Hydraulic
Overall width
27.91in
Drum Width
9.65in
Drum Diameter
8in
Winch Length
35.63in
Throat Clearance
5.6in
Maximum line pull – bare drum
40000lb
Drum capacity – recommended cable
371ft
Winch length
27.76in
Overall width
29.2in
Control
Hydraulic
Maximum line speed – bare drum
131ft/min
Maximum line speed – full drum
207ft/min
Drum width
10.8in
Drum capacity – optional
256ft
Throat clearance
6.75in
Weight
1345lb
Rope diameter – recommended
0.63in
Speed
Variable
Maximum line pull – full drum
25000lb
Drum diameter
10in
Rope diameter – optional
0.75in
Winch drive
Hydrostatic
  • Power Train
    • Air cleaner with precleaner, automatic dust ejection and under hood intake
    • Aluminum bar plate cooling system (radiator, power train)
    • Automatic traction control
    • Cat C3.6 diesel engine
    • Drive, auxiliary
    • Dual path, closed loop, hydrostatic transmission
    • Electric fuel pump
    • Fuel/water separator
    • Turbocharged aftercooled
  • Electrical
    • Alarm, backup
    • Alternator, 150 amp, heavy duty
    • Batteries, heavy duty, maintenance free, 1,000 CCA
    • Diagnostic connector
    • Four integrated front halogen lights, two rear halogen
    • Horn, electric
    • Starter, electric, 12 V, heavy duty
  • Undercarriage
    • Heavy Duty (HD) Undercarriage (43 section)
    • Carrier rollers
    • Guards, front/rear guiding
    • Seven roller track frame
    • Track adjusters, hydraulic
    • Track rollers, lifetime lubricated
  • Hydraulic
    • Hydraulic pump and oil
    • Single lever, three function control
    • Three valve hydraulics
  • Cat Technology
    • Low Slip Traction Control (included with ARO and Cat Grade 3D)
    • Slope Indicate
    • Cat Product Link PLE643/PLE743 Cellular
    • Third party 3D grade system compatible
    • Stable Blade – Basic Lift
    • Slope Indicate
  • Attachments
    • Rigid drawbar
    • Front pull device
  • Operator Environment
    • Armrests, adjustable
    • Coat hook
    • Controls, seat mounted, fore/aft adjustment
    • Cup holders
    • Eco Mode
    • Electronic Monitoring system with gauge:
      – Chassis slope indication
      – Diesel exhaust fluid (DEF)
      – Engine coolant temperature
      – Fuel level
      – Hydraulic oil temperature
    • Electronic security system
    • Engine air cleaner service indicator
    • Engine RPM and gear display
    • Floor mat, rubber, heavy duty
    • Foot pads, dash
    • Hour meter, electronic
    • Independent forward/reverse speed settings
    • Mirror, rearview, inside
    • Power port, 12 volt
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, hi-vis retractable 76 mm (3″)
    • Seatbelt buckling indicator/reminder
    • Single pedal combining decel and brake functions
    • Speed recall
    • Storage compartment
    • Throttle switch, rotary
    • Travel speed limiter, electronic
  • Power Train
    • Air cleaner with external precleaner
    • Installation, winch
  • Electrical
    • Four integrated front LED lights, two rear LED
  • Undercarriage
    • Abrasion Undercarriage (38 section)
    • Track Pairs
      – Track, 460 mm (18 in)
      – Track, 635 mm (25 in)
  • Hydraulic
    • Four valve for use with ripper
    • Four valve for use with winch
  • Cat Technology
    • Cat Grade with Slope Assist
    • Cat Command Station (availability varies by region
    • Cat Command Console (availability varies by region)
    • Full-color 254 mm (10 in) touchscreen grade display
    • Cat Product Link PLE683/PLE783 Cellular/Satellite
    • Grade 3D with Assist includes:
      – Same Assist with ARO features
      – Steer Assist 3D
      – Grade 3D
    • Assist with Attachment Ready Option (ARO) includes:
      – Slope Indicate
      – Blade Load Monitor
      – Stable Blade Lift and Tilt
      – Slope Assist
      – Traction Control
      – Steer Assist
      – AutoCarry
  • Attachments
    • Drawbar, towing
    • Machine security system
    • Mounting, winch
    • Ripper, parallelogram, includes three shanks and teeth
    • Winch, hydraulic, high performance
    • Winch, hydraulic, retrieval
  • Operator Environment
    • Power Pitch
    • Cab, with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Radio, AM/FM Bluetooth®
    • Seat, air suspended, cloth or vinyl
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Sound suppression
  • Other
    • Heater, engine, coolant 120 V/240 V
    • Starting aid, ether

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here