Exterior View
Interior View
Net Power

814 hp

Operating Weight

233430 lb

Bucket Capacities

11.5-24.5 m³ (15-32 yd³)

992 Wheel Loader

ABOUT THE 992

The Cat® 992 Large Wheel Loader has set the standard in its size class for more than 50 years, delivering industry-leading productivity, unparalleled reliability and long life. Today’s 992 raises the bar. Compared to the 992K, the new 992 is up to 48% more efficient and 32% more productive, thanks to higher payload for improved pass match, increases in rimpull and breakout force, and an optimized linkage design. Extended component replacement intervals plus increased filter and turbo life help reduce maintenance costs. These improvements — and many more — combine to provide significant savings over the life of the machine for the lowest owning and operating costs in the industry. With both standard and high-lift configurations, the 992 offers the ideal pass match for fleets of Cat 775, 777 and 785 trucks.

Add the 992 Model to the Cart
Net Power
814hp
Engine Model
Cat® C32B
Emissions
U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
Rated Speed
1750 rpm
Gross Power – SAE J1995 at 1,750 rpm – Tier 4/HRC (Highly Regulated Country) – Standard
900hp
Gross Power – SAE J1995 at 1,750 rpm – Tier 4/HRC – High Ambient
937hp
Gross Power – SAE J1995 at 1,750 rpm – Tier 2/LRC (Less Regulated Country) – Standard
907hp
Gross Power – SAE J1995 at 1,750 rpm – Tier 2/LRC – High Ambient
944hp
Gross Power – ISO 14396 at 1,750 rpm – Tier 4/HRC – Standard
884hp
Gross Power – ISO 14396 at 1,750 rpm – Tier 4/HRC – High Ambient
921hp
Gross Power – ISO 14396 at 1,750 rpm – Tier 2/LRC – Standard
893hp
Gross Power – ISO 14396 at 1,750 rpm – Tier 2/LRC – High Ambient
931hp
Net Power – SAE J1349 at 1,750 rpm – Tier 4/HRC – Standard
814hp
Net Power – SAE J1349 at 1,750 rpm – Tier 4/HRC – High Ambient
814hp
Net Power – SAE J1349 at 1,750 rpm – Tier 2/LRC – Standard
823hp
Net Power – SAE J1349 at 1,750 rpm – Tier 2/LRC – High Ambient
823hp
Bore
5.7in
Stroke
6.4in
Displacement
1963.5in³
Peak Torque – SAE J1995 – Tier 4/HRC – Standard @ 1,200 rpm
3514ft·lbf
Peak Torque – SAE J1995 – Tier 4/HRC – High Ambient @ 1,300 rpm
3555ft·lbf
Peak Torque – SAE J1995 – Tier 2/LRC – Standard @ 1,200 rpm
3537ft·lbf
Peak Torque – SAE J1995 – Tier 2/LRC – High Ambient @ 1,350 rpm
3570ft·lbf
Operating Weight
233430lb
Rated Payload – Standard
25.5ton (US)
Rated Payload – Standard (Material Handler)
30ton (US)
Rated Payload – High Lift
22.5ton (US)
Rated Payload – High Lift (Material Handler)
27ton (US)
Bucket Capacity Range
11.5-24.5 m³ (15-32 yd³)
Cat Truck Match – Standard
775/777
Cat Truck Match – High Lift
785
Bucket Capacities
11.5-24.5 m³ (15-32 yd³)
Transmission Type
Cat Planetary Powershift
Forward – 1
4.3mile/h
Forward – 2
7.4mile/h
Forward – 3
12.7mile/h
Direct Drive – Forward 1
Disabled
Direct Drive – Forward 2
8mile/h
Direct Drive – Forward 3
14mile/h
Reverse – 1
4.7mile/h
Reverse – 2
8.1mile/h
Reverse – 3
13.9mile/h
Direct Drive – Reverse 1
5mile/h
Direct Drive – Reverse 2
8.8mile/h
Direct Drive – Reverse 3
15.3mile/h
Lift/Tilt System – Circuit
Positive Flow Control
Lift/Tilt System – Pump
Variable Displacement Piston
Maximum Flow at 2,165 rpm
250gal/min
Relief Valve Setting – Lift/Tilt
5000psi
Lift Cylinder – Bore
9.3in
Lift Cylinder – Stroke
63.5in
Tilt Cylinder – Bore
11.5in
Tilt Cylinder – Stroke
41.5in
Rack Back
2.3s
Rack Back – High Lift
2.3s
Raise
9s
Raise – High Lift
9s
Dump
2.6s
Dump – High Lift
2.6s
Float Down
3.2s
Float Down – High Lift
3.2s
Total Hydraulic Cycle Time
17.1s
Fuel Tank
385.7gal (US)
Cooling Systems
59.4gal (US)
Crankcase
31.7gal (US)
Transmission
51.5gal (US)
Differential – Final Drives – Front
96.4gal (US)
Differential – Final Drives – Rear
96.4gal (US)
Hydraulic System Factory Fill (Implement)
104.1gal (US)
Hydraulic Tank – Implement
60.2gal (US)
Hydraulic Factory Fill (Steering)
32.5gal (US)
Hydraulic Tank (Steering Tank Only)
26.3gal (US)
Front
Fixed
Rear
Trunnion
Oscillation Angle
±9°
Brakes
ISO 3450:2011
Steering System – Circuit
Pilot, Load Sensing
Steering System – Pump
Piston, Variable Displacement
Maximum Flow at 1,400-1,850 rpm
70gal/min
Steering Cut Off Pressure
4500psi
Total Steering Angle
80°
Steering Cycle Times – Low Idle
4.9s
Steering Cycle Times – High Idle
3.1s
Ambient Capability Hydraulically Driven Demand Fan – Standard
109.4°F
Ambient Capability, Hydraulically Driven Demand Fan – High
131°F
Note
Machine Sound Level (ISO 6396:2008) – 116 dB(A)
Note
Machine Sound Level (ISO 6396:2008) – 113 dB(A)
Ground to Top of Exhaust Stacks
17ft
Ground to Top of ROPS
18.3ft
Ground to Top of Hood
13.1ft
Ground to Center of Front Axle
4.3ft
Ground to Bumper Clearance
3.8ft
Ground to Lower Hitch Clearance
2.2ft
Reach – Maximum Lift
8.2ft
Clearance at Maximum Lift
15.2ft
B-Pin Height – Maximum Lift
22.8ft
Maximum Overall Height – Bucket Raised
30.8ft
Rear Axle – Centerline to Bumper
13.5ft
Tread Width
10.83ft
Rack Back Angle – Maximum Lift
56.9 degrees
Dump Angle at Maximum Lift
-49.5 degrees
Rack Back Angle – Ground Level
40.2 degrees
Width – Over Tires – With Bulge
14.74ft
Wheel Base
19.3ft
Rack Back Angle – Carry
48.9 degrees
Maximum Overall Length
50.8ft
Front Axle Centerline to Bucket Tip
18ft
Tread Width
10.83ft
Rack Back Angle – Ground Level
42.5 degrees
Dump Angle at Maximum Lift
-48.1 degrees
Rack Back Angle – Maximum Lift
56.2 degrees
Width – Over Tires – With Bulge
14.75ft
Rack Back Angle – Carry
51.6 degrees
Ground to Top of Exhaust Stacks
17ft
Ground to Top of ROPS
18.3ft
Ground to Top of Hood
13.1ft
Ground to Center of Front Axle
4.3ft
Ground to Bumper Clearance
3.8ft
Ground to Lower Hitch Clearance
2.2ft
Reach – Maximum Lift
7.6ft
Clearance at Maximum Lift
17.2ft
B-Pin Height – Maximum Lift
24.5ft
Maximum Overall Height – Bucket Raised
32ft
Rear Axle – Centerline to Bumper
13.5ft
Wheel Base
19.3ft
Maximum Overall Length
51.6ft
Front Axle Centerline to Bucket Tip
18.8ft
  • Power Train
    • Engine, C32B
    • Fuel priming pump (electric)
    • Ground-level engine shutdown
    • Engine air intake (above hood) precleaner
    • Aluminum Modular Radiator (AMR)
    • Automatic, ether starting aid
    • Electronic throttle lock
    • Impeller Clutch Torque Converter (ICTC) with lock-up clutch
    • Rimpull control system
    • Planetary powershift, 3F/3R electronic control transmission
    • Delayed engine shutdown
    • Oil-cooled, multi-disc, service brakes
    • Electro-hydraulic parking brake
    • Auto retarding controls
    • Brake temp estimator
    • Autoshift
  • Linkage
    • Standard lift (23 tonnes/25.5 tons face, 27.2 tonnes/30 tons loose)
  • Efficiency
    • Variable displacement implement pumps
    • Variable displacement load-sensing steering
    • Variable displacement cooling fan pump
    • Torque converter lock-up clutch
    • Bucket float
    • Automatic bucket controls:
      – Lift kickout
      – Return-to-dig kickout
    • Default on-demand throttle (economy mode) with HP+ mode button
    • Engine idle shutdown
  • Electrical And Lighting
    • 150-amp alternator
    • Four 1400 CCA batteries
    • 10/15 amp, 24V to 12V converter
    • Battery – single pole (master disconnect) isolator
    • Emergency jump-start receptacle
    • Starter and transmission lockout in bumper
    • 24V starting and charging system
    • Electric starters
    • Live line indicators in service center
    • LED warning lights (pattern selectable)
    • LED lighting system:
      – Two front- and rear-mounted LED turn signals
      – Four forward-facing running lights
      – Three forward-facing flood lights
      – Four platform-mounted flood lights
      – Two forward-facing high beams
      – Four rear-facing floods
      – Four stairway lights
      – Two engine bay service lights
  • Operator Environment
    • Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
    • Bonded glass, tinted
    • Trainer seat
    • Dual-lever lift and tilt function controls
    • Implement kickouts
    • Air conditioner
    • Cab pressure indicator
    • Graphical touchscreen information display conveys real-time operating information and payload measurement
    • Heater, defroster, auto temperature controls
    • Gauge instrumentation with configurable widgets:
      – Status indicators
      – Wheel rev counter
      – Simplified payload
      – TPMS (optional)
      – Bucket angle
      – Coolant temperature
      – Hydraulic oil temperature
      – Fuel level
      – Power train oil temperature
      – Engine speed (tachometer)
      – Transmission gear
      – Ground speed
      – Engine hour meter
    • Powered cab precleaner
    • Operator presence status
    • Starting/charging system malfunction
    • Electronic OMM
    • Operator controls help
    • Two USB charging ports
    • CB mounting, 12V/24V power and antenna
    • 14-pin service port
    • 12V power
    • Selectable application profiles
    • Entertainment radio mute
    • Push-To-Start (PTS)
    • Warning/indicator instrumentation
    • Keypad control with indicator lights
    • Dome light in cab
    • Lunchbox and beverage holders
    • Electro-hydraulic force feedback steering
    • Vital Information Management System (VIMS) with information display: external data port, cycle timer
    • Coat hook
  • Safety
    • Ground-access ladders
    • Rear-vision camera
    • Front walkway around cab
    • Tie-offs on ROPS
    • Steering frame lock
    • Stairways on both sides of the machine
    • Platform toe kicks
    • Retractable seatbelt, operator and trainer seat
    • Back-up alarm
    • Electric disc horns
    • Implement lock switch
    • Seatbelt warning
    • Entertainment radio mute
  • Machine Control And Guidance
    • MineStar Health ready
      MineStar GUIDE ready
      MineStar Edge ready
  • Cooling
    • Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
  • Service
    • Ground-level service center including:
      – Implement and cooling fan oil level indicator
      – Steering and brake oil level indicator
      – Window washer fluid level indicator
      – Transmission oil level indicator
      – Fuel level indicator
      – Engine oil level indicator
      – Engine coolant level indicator
      – Automatic lubrication system grease tank level indicator
      – Starter lockout and LED
      – Heavy-duty battery disconnect switch
      – Stairway light switch
      – Service lighting switch (if equipped)
      – Fuel shutoff engine shutdown switch
      – Engine oil fast-fill port
      – Transmission oil fast-fill port
      – Steering and brake hydraulic oil fast-fill port
      – Steering and brake hydraulic oil drain port
      – Engine coolant fast-fill port
      – Implement and cooling fan hydraulic oil fast-fill port
      – Implement and cooling fan hydraulic oil drain port
      – Automatic lubrication system grease tank fill port
      – 24V jump-start receptacle
      – 12V power port
      – 120V jacket water plug (if equipped)
      – 240V jacket water plug (if equipped)
      – VIMS key switch
      – 14-pin service port
      – Transmission lockout and LED
    • In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
    • High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
    • Implement pump efficiency monitoring
    • Rock guards on linkage grease lines
    • Cat O-ring face seal couplings
    • Lockable service access doors
    • Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
    • Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
    • Ground-level fast-fill fuel system
    • Drawbar hitch with pin
    • Cat XT hoses
    • Left-side service center
    • Oil sampling valves
    • Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
    • Rear access to cab and service platform
    • Load-sensing steering
    • Vandalism protection caplocks
    • Cooling cleanout service access
    • Telematics and Cat Electronic Technician service port in bumper
    • Automatic Autolube filling shutoff valve
  • Power Train
    • Advanced auto retarding controls with engine brake
  • Linkage
    • High lift (20.5 tonnes/22.5 tons face, 24.5 tonnes/27 tons loose)
  • Electrical And Lighting
    • Dual pole battery isolator
    • Six service lights
    • Two hitch-mounted lights
  • Operator Environment
    • Rubber-mounted, high-impact resistant solar control glass
    • Trainer seat with suspension
    • Joystick lift and tilt function controls
    • Bluetooth®-enabled machine security
    • Sun screen, pull down (front and rear)
    • AM/FM/AUX radio
    • AM/FM/AUX/USB/BT/CD/SAT radio
  • Safety
    • Powered ground-access stairs
    • Side-vision cameras (270 degree)
    • Cat Detect (rear object detection)
    • Wheel chocks
    • Secondary steering
    • Electric trumpet field horn plus electric shop horn
    • Fire suppression ready (tank mounting provision and provision for integration with machine electronics for monitoring faults or activation)
    • Emergency stop system
  • Cold Weather
    • Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
    • 120V or 240V coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
    • Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
    • Heated mirrors
  • Machine Control And Guidance
    • Cat Payload with Overload Prevention
    • New Autodig Components:
      – Tire slip prevention
      – Lift stall prevention
      – Tire set
    • Operator coaching
  • Cooling
    • High ambient package (recommended for site conditions that do not exceed 55° C [131° F])
  • Rims And Tires
    • Rims – 914.4 mm (36″) (36 × 45)
      113.3 mm (4.5″) flange
      For use with 45/65R45 and 45/65-45 tires
      Tires – 45/65R45
      Tires – 45/65-45
  • Spare Rims
    • 914.4 mm (36″) (36 × 45) (4.5″) flange
  • Service
    • Transmission and engine guards
    • Diagnostic lines for easy troubleshooting access
    • Product Link cellular
    • Product Link (dual mode – satellite/cellular)
  • Sound
    • Sound-suppression package
  • Load And Carry Or Extensive Tramming
    • Ride control

Coming Soon

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here