Exterior View
Exterior View
Interior View
Interior View
Engine Model

C15 Cat®

Peak Power Speed

1600

Peak Power Speed – Gross – SAE J1995

456 hp

986 Wheel Loader

ABOUT THE 986

Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The 986 builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.

Add the 986 Model to the Cart
Engine Model
C15 Cat®
Peak Power Speed
1600
Peak Power Speed – Gross – SAE J1995
456hp
Engine Power – ISO 14396:2002
449hp
Net Power – SAE J1349:2011
373hp
Rated Speed
2000
Rated Speed – 2,000 rpm – EEC 80/1269
373hp
Rated Speed – 2,000 rpm – EEC 80/1269 (DIN)
378hp
Rated Speed – 2,000 rpm – ISO 9249
373hp
Rated Speed – 2,000 rpm – ISO 9249 (DIN)
378hp
Bore
5.4in
Stroke
6.75in
Displacement
927in²
Peak Torque – 1,200 rpm – SAE J1995
1778lb/ft
Torque Rise
16%
Emissions
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
Transmission Type
Cat planetary power shift
Forward – 1
5mile/h
Forward – 2
8mile/h
Direct Drive – Forward 2
8mile/h
Direct Drive – Forward 3
14mile/h
Direct Drive – Forward 4
24mile/h
Reverse – 1
5mile/h
Reverse – 2
8mile/h
Direct Drive – Reverse 2
9mile/h
Direct Drive – Reverse 3
16mile/h
Direct Drive – Reverse 4
25.4mile/h
Operating Weight – Standard
97785lb
Operating Weight – High Lift
104005lb
Rated Payload – Standard (Quarry Face)
11ton (US)
Rated Payload – Loose Material (Standard)
14ton (US)
Rated Payload – High Lift (Quarry Face)
11ton (US)
Rated Payload – Loose Material (High Lift)
12.1ton (US)
Bucket Capacity Range
5-10,3 m³ (6,5-13,5 yd.³)
Cat Truck Match – Standard
770/735/740/745
Cat Truck Match – High Lift
772/773
Lift/Tilt System – Circuit
Load Sense
Lift/Tilt System – Pump
2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm
123gal/min
Relief Valve Setting – Lift/Tilt
4050psi
Lift Cylinder – Bore
7.5in
Lift Cylinder – Stroke
45in
Tilt Cylinder – Bore
6.7in
Tilt Cylinder – Stroke
28.4in
Rack Back
4.5s
Raise
9s
Dump
3.5s
Lower
5.2s
Lower Float Down
4.3s
Total Hydraulic Cycle Time
21.3s
Steering System – Circuit
Load Sense
Steering System – Pump
Piston, variable displacement
Maximum Flow at 1,400 rpm
52gal/min
Steering Cut Off Pressure
4000psi
Total Steering Angle
70°
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Front
Fixed
Rear
Trunnion
Oscillation Angle
±12.5°
Oscillation Angle – Chain Arrangement
±8.5°
Brakes
ISO 3450:2011
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Fuel Tank
141gal (US)
Fuel Tank – Short Lift
127gal (US)
Cooling Systems
26gal (US)
Crankcase
9gal (US)
Diesel Exhaust Fluid Tank
6gal (US)
Transmission
20gal (US)
Axle Oil – Differentials and Final Drives – Front
49gal (US)
Axle Oil – Differentials and Final Drives – Rear
45gal (US)
Hydraulic System Factory Fill
87gal (US)
Hydraulic System – Tank Only
34gal (US)
Operator Sound Level (ISO 6396)
72dB(A)
Machine Sound Level (ISO 6395)
112dB(A)
Note
Operator Sound Level (ISO 6396)
72dB(A)
Machine Sound Level (ISO 6395)
110dB(A)
Note
Ground to Top of ROPS
13.5ft
Ground to Top of Exhaust Stacks
13.3ft
Ground to Top of Hood
10.7ft
Ground to Center of Front Axle
3.2ft
Ground to Fuel Tank Clearance
2.3ft
Ground to Lower Hitch Clearance
1.5ft
Reach – Maximum Lift
7.1ft
Clearance at Maximum Lift
10.1ft
B-Pin Height – Maximum Lift
16.1ft
Maximum Overall Height – Bucket Raised
22.4ft
Rear Axle – Centerline to Bumper
10.3ft
Wheel Base
12.5ft
Maximum Overall Length
36.6ft
Front Axle Centerline to Bucket Tip
13.8ft
Note
Ground to Top of ROPS
13.5ft
Ground to Top of Exhaust Stacks
13.3ft
Ground to Top of Hood
10.7ft
Ground to Center of Front Axle
3.2ft
Ground to Fuel Tank Clearance
2.3ft
Ground to Lower Hitch Clearance
1.5ft
Reach – Maximum Lift
7.4ft
Clearance at Maximum Lift
11.6ft
B-Pin Height – Maximum Lift
17.6ft
Maximum Overall Height – Bucket Raised
23.9ft
Rear Axle – Centerline to Bumper
10.3ft
Wheel Base
12.5ft
Maximum Overall Length
38ft
Front Axle Centerline to Bucket Tip
15.3ft
Note
Ground to Top of ROPS
13.5ft
Ground to Top of Exhaust Stacks
13.3ft
Ground to Top of Hood
10.7ft
Ground to Center of Rear Axle
3.2ft
Ground to Fuel Tank Clearance
2.3ft
Ground to Lower Hitch Clearance
1.5ft
Reach at Maximum Lift
8ft
Clearance at Maximum Lift
10.7ft
B-Pin Height at Maximum Lift
15ft
Maximum Overall Height, Bucket Raised
20.9ft
Rear Axle Center Line to Bumper
10.3ft
Wheel Base
12.5ft
Maximum Overall Length
35ft
Front Axle Centerline to Bucket Tip
12.2ft
Ground to Top of ROPS
13.5ft
Ground to Top of Exhaust Stacks
13.3ft
Ground to Top of Hood
10.7ft
Ground to Center of Rear Axle
3.2ft
Ground to Fuel Tank Clearance
2.3ft
Ground to Lower Hitch Clearance
1.5ft
B-Pin Height at Maximum Lift
15ft
Rear Axle Center Line to Bumper
10.3ft
Wheel Base
12.5ft
Maximum Overall Length
35.4ft
Front Axle Centerline to Bucket Tip
12.6ft
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Electrical
    • Alarm, back-up
    • Alternator, single 145 amp
    • Batteries, dry
    • Converter, 10/15 amp, 24V to 12V
    • Lighting system (halogen, work lights, access and service platform lighting)
    • Starting and charging system, 24V
    • Starter emergency start receptacle
  • Operator Environment
    • Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
    • Air conditioner
    • Rear vision camera system
    • Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
    • Controls, lift and tilt function
    • Heater, defroster
    • Horn, electric
    • Instrumentation, gauges:
      – Coolant temperature
      – Fuel level
      – DEF level
      – Hydraulic oil temperature
      – Power train oil temperature
    • Light, cab, dome
    • Lunchbox, beverage holders
    • Mirrors, rearview (externally mounted)
    • Seat, Cat Comfort (cloth), air suspension, six-way adjustable
    • Seat belt minder
    • Seat belt, retractable, 76 mm (3 in) wide
    • STIC Control System
    • UV glass
    • Transmission gear indicator
    • Wet-Arm wipers/washers (front and rear):
      – Intermittent front and rear wipers
    • Lights, directional
  • Power Train
    • Cat Production Measurement ready
    • Brakes, oil-cooled, multi-disc, service/secondary
    • Case drain screens
    • Crankcase guard
    • Electro hydraulic parking brake
    • Engine, C15 MEUI diesel, turbocharged/aftercooled
    • Ground level engine shutoff
    • Turbine precleaner, engine air intake
    • Starting aid, ether, automatic
    • Torque converter, Neutralizer
    • Transmission, planetary powershift, 4F/3R electronic control
    • Manual switch and automatic fuel priming
  • Other
    • Automatic bucket lift kickout/positioner
    • Hydraulically driven demand fan
    • Couplings, Cat O-ring face seals
    • Doors, service access (locking)
    • Ecology drains for engine, radiator, hydraulic tank
    • Fuel tank, 535 L (141 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT
    • Hydraulic, steering and brake filtration/screening system
    • Cat Clean Emission Module
    • Oil sampling valves
    • Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
    • Rear access to cab and service platform
    • Steering, load sensing
    • Toe kicks
    • Vandalism protection caplocks
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • –50° C (–58° F) antifreeze
    • Engine oil change system, high speed, Wiggins
    • Engine block heater 120V or 240V
    • High ambient cooling – software
    • Cat Production Measurement
  • Miscellaneous Attachments
    • Front and rear roading fenders
    • Fast fill fuel system (Shaw-Aero)
    • Cold Weather Starting (extra two batteries)
  • Other Optional Configurations
    • Aggregate Handler
    • Block Handler
  • Operator Environment
    • Cab powered precleaner
    • Cat Detect Vision
    • AM/FM/CD/MP3 radio
    • Satellite Sirius radio with Bluetooth
    • LED warning strobe
    • CB radio ready
    • Window pull down visor
    • Handrail mounted mirrors

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here